PDA

View Full Version : Crank pulley balance pin....Location?



speedyg
11-06-2002, 10:14 PM
I am in the process of putting on my underdrive pulley set. I have just removed the four bolts for the crank pulley, and the instructions say to remove the balance pin vibration damper. What is this?, where is it located? and how do I remove it? Thanks in advance

Brandon

gldiii
11-07-2002, 12:37 PM
The latest information I have heard from a long time SC enthusiast directly from a Ford engineer involved with the SC, is that those pins are in there for final engine balance and do not balance the damper and pulley as a unit. Therefore, the pins should not be removed for your new pulley, since it and the old pulley were already neutrally balanced.

The pins are located in holes around the outer ring of the stock damper and would be seen between the engine block and damper (if you can see back there, lol). Not all balancers have them.