PDA

View Full Version : 94 SC complete motor and trans



Lee Billing
04-15-2013, 11:10 PM
EDIT: Ok guys I will part this thing out. If you need any parts let me know. I think everything is listed that I have. If you need something I missed PM me and Ill see if I have it.

I have pulled the motor out of my 94 SC and am installing my cobra motor. I want to sell the complete powertrain as one. If this does not go well I may part it out but probably not. This would include the engine, trans, radiator, overflow tank, engine harness, EEC harness, PCM, starter and battery harness, engine mounts, driveshaft, intercooler, B&M shifter if price is right,

The motor and trans has 117,000 on it and when i pulled it I had no problems whatsoever. The M5R2 shifted very nicely.
The clutch was replaced with a LUK replacement clutch not a autozone special at about 113,000 with slave cylinder, throw out bearing.
Also had flywheel resurfaced.
Alternator was just rebuilt about 1000 miles ago.
I did plugs and wires when I bought this car at 110,000

It does leak oil from all the normal SC spots. Did not eat coolant or oil. There was some oil in the bottom of the Intercooler tube.

I would entertain partial trades for a Meth injection kit. PM me with offers because I honestly do not know what all this is worth, I'm thinkin within the 1500-1800 range but not sure.

Here are some pics: http://www.sccoa.com/forums/showthread.php?p=1030189#post1030189

Thanks
Lee

sccrewzer
04-16-2013, 12:21 AM
If you do decide to part it out ill be interested in the transmission let me know.

TBirdSC89
04-16-2013, 12:52 AM
it looks ver clean, have you done any work to the motor such as headgaskets or anything major?

Lee Billing
04-16-2013, 07:42 AM
I have not done headgaskets since I've had it. It looks like its been apart tho. I can't say for sure that they have been done.

Lee Billing
04-22-2013, 11:58 AM
To the top. No interest ?

Jimmy 2Coupes
04-22-2013, 02:30 PM
Bad timing man. I just traveled 275 miles one way a couple of weeks ago to pick up an engine from a 94. I got a pretty good deal on it (thanks Kevin) but if this would’ve been up then...well it would’ve been a lot closer. I really only wanted the engine though. Good luck with the sell…I’m sure someone out there could use a 94 five speed engine and drivetrain.

Lee Billing
04-24-2013, 02:50 PM
To the top. Gonna part out. Let me know what you want.

BirdofPrey97
04-24-2013, 04:12 PM
Interested in the oil pick up, windage tray and clutch pedal assembly shipped to 50021.

Thanks!

Lee Billing
04-24-2013, 05:45 PM
Interested in the oil pick up, windage tray and clutch pedal assembly shipped to 50021.

Thanks!

How soon do you need them? How's 55 shipped sound? I am not selling the clutch pedal assy. It is being used for my project.

Thanks
Lee

BirdofPrey97
04-25-2013, 08:31 AM
How soon do you need them? How's 55 shipped sound? I am not selling the clutch pedal assy. It is being used for my project.

Thanks
Lee

I am in no hurry. When they are available just let me know.

Creighton
12-11-2016, 02:00 AM
Would be interested in the engine. Suspect shipping to 99212 will be bad but less than rebuild cost of my frozen new to me 94 SC engine.
Please let me know how much for the motor/shipping. Still getting up to speed, will bolt to an AOD correct?
WA. is bad cars have to be on the road soon/pass smog or gets spendy.
Thanks!
Creighton
509-536-6616
cjsmih1@ix.netcom.com
cjs@lost-coast-designs.com

davec73
12-11-2016, 06:01 PM
Would be interested in the engine. Suspect shipping to 99212 will be bad but less than rebuild cost of my frozen new to me 94 SC engine.
Please let me know how much for the motor/shipping. Still getting up to speed, will bolt to an AOD correct?
WA. is bad cars have to be on the road soon/pass smog or gets spendy.
Thanks!
Creighton
509-536-6616
cjsmih1@ix.netcom.com
cjs@lost-coast-designs.com
This thread is 4 years old.