PDA

View Full Version : 94-95 blower fit on90?



kw90supercoupe
05-07-2013, 12:52 AM
If I buy a 94-95 ported blower with a matched inlet plentium will it bolt on my 90 sc? If not a direct bolt what is needed to make it work? I think it will. Let me know thanks

Flex
05-07-2013, 01:07 AM
If all else will be stock, you also need to replace your 30 lb injectors with late model 36's.

Flex
05-07-2013, 01:08 AM
It is otherwise a direct bolt on.

SCDan35thANV
05-07-2013, 04:32 PM
... oops misread what you already had the inlet. Injectors would be a good idea too.

kw90supercoupe
05-07-2013, 11:46 PM
Its a ported blower. And I want to put the blower and underdrive pully on it 42lb wouldent be too much would it?

Flex
05-08-2013, 12:02 AM
No. Would be better than 36's if you have them.

gr8ghost
05-13-2013, 10:35 PM
You will likely want to use the 94-95 TB and MAF as well. Or some aftermarket parts that are bigger than the early years'

Flex
05-13-2013, 10:45 PM
The stock tb's are all 60mm. The late model MAF is a waste of time. Get a 73 or 76 C & L.