PDA

View Full Version : Finally!!!



Mike Bolduc
05-18-2013, 10:28 PM
Finally join the sccoa forum!! :D

I own my supercoupe since 7 years and he is out of the road since 5 years (engin blow-by)!! :rolleyes: So I start to rebuilt my engin 2 years ago when I finish the marine school!! I am everytime at work, but when I have some minutes I try to work on it!! :rolleyes: So now I am pretty close to finish my project but I have some electrical trouble that I need to repair before... %&#@$ squirrel!! :confused:

Mike Bolduc
05-18-2013, 10:37 PM
Last pics I take!!

David Neibert
05-22-2013, 01:40 PM
Looking pretty good. What size blower is that ?

David

BLOWN38
05-22-2013, 01:46 PM
Alot of work right there.:cool: Any reason why you turned the throttle body sideways? I assume to get the IAC in there somehow.

Actually I guess the TB is from a different vehicle.

nickleman60
05-22-2013, 04:01 PM
Is the bracket where the ac compressor was located for your coil pack? It looks like it's mounted on the backside of it.

Mike Bolduc
06-02-2013, 07:57 PM
It's a 2.2AR blower with a 90mm accufab throttle body for 5.0 mustang!! The reason why I put throttle linkage on top is because the conception of the throttle body is different than thunderbird and like this I dont need to change the configuration!! If I put the throttle body in the same position than stock, the throttle linkage cannot move!! (Try to post some pics) And yes the braket place where the AC is, is my braket for the coil pack!!

JT's03
06-03-2013, 06:31 PM
Good work Mike! I like these home builds. Whats done to the motor?

superdadsc
06-03-2013, 11:54 PM
That going to be nasty!

Mike Bolduc
06-04-2013, 05:24 PM
Complete rebuilt engine: forged wiseco piston for 8.8:1 CR, scat rods, hydraulic custom cam .602 intake with 224 duration .610 exhaust with 228 duration 112 lobe separation with 1.73 roller rocker, DD custom street/strip heads porting and match port intake, #60 siemens injectors...

Mike Bolduc
06-04-2013, 05:25 PM
Maybe to small injectors but will try them first!!:rolleyes:

Jeff Bratton
06-16-2013, 01:25 PM
Haha, welcome to the Club forums Mike! Very nicely done engine!

Mike Bolduc
07-03-2013, 11:06 PM
Thanks Jeff!! Not clean now, but plan to put some powder coat on that!! ;)

davec73
07-03-2013, 11:40 PM
Looks great! I think you may want to upgrade your injectors w the 2.2 ar

Mike Bolduc
07-03-2013, 11:58 PM
Yeah maybe... but will try with my #60 first!! :rolleyes: I supposed too that my injectors is to small... :o