PDA

View Full Version : Lincoln Mark VIIII bigger brakes for sale and more



mywhite89
06-20-2013, 07:46 PM
-Mark VIIII upgrade front brake kit for newer spindle (93-97)cars KVR cross-drilled rotors, Loaded calipers with KVR brakes pads, used 90% life. These are bigger brakes than stock for thunderbirds. Bolt right up with no modifications, workes great for me. $150 plus shipping
-SCT chip with multi-adjustable tune cord $75 plus shipping

Chris

mywhite89
06-20-2013, 07:47 PM
Parts sold from this post

mywhite89
06-20-2013, 07:49 PM
multi-adjustable tunable sct computer chip. This one is tuned to the 95sc. Tuned for 60lb injectors, 80mm maf, mpx blower, all bolt-ons, custom ground cam, and bigger valve heads. Automatic car.

mywhite89
06-20-2013, 07:49 PM
no more pictures, items from this post were sold

Falcon20x
06-20-2013, 09:22 PM
I ll take the rear black leather seat and few other things


PM sent

mywhite89
06-20-2013, 10:39 PM
All parts from this post gone

BirdofPrey97
06-21-2013, 08:42 AM
Interested in pieces.

10% SC OD pulley as I damaged mine for the 25% kit.

Aluminum Water and Alt Pulleys.

If they can be purchased this way let me know.

mywhite89
06-21-2013, 12:20 PM
Interested in pieces.

10% SC OD pulley as I damaged mine for the 25% kit.

Aluminum Water and Alt Pulleys.

If they can be purchased this way let me know.

I'll keep your request in mind, though It would be in best interest to at least sell the blower pulley and jackshaft together. I might have a buyer for all the aluminum pulleys.

chris

gaetz1985
06-21-2013, 12:29 PM
As long as it was decently priced id be willing to team up and let BirdOfPrey buy the sc pulley and me the jackshaft pulley as I already have the sc pulley

mywhite89
06-21-2013, 12:35 PM
Make me an offer, keep in mind shipping on top of that probably be $12-20 more maybe.....

mywhite89
06-22-2013, 12:50 PM
As long as it was decently priced id be willing to team up and let BirdOfPrey buy the sc pulley and me the jackshaft pulley as I already have the sc pulley

I'll separate those pulleys how does $85 plus shipping for the 10 rib blower pulley and $110 plus shipping for the 10 rib jackshaft sound?

Chris

mywhite89
06-22-2013, 12:54 PM
Looks like injectors will be sold soon, everything else seems to be up for grabs.

Chris

mywhite89
06-22-2013, 01:05 PM
as requested pictures of both seat bottoms for sale. You can see the slight imperfections on both seats in the pictures. Seat on the right has no other imperfections besides some fading. Left seat has another 2 inch scratch in the leather but is still very usable.

chris

David R.
06-22-2013, 01:27 PM
I'll separate those pulleys how does $85 plus shipping for the 10 rib blower pulley and $110 plus shipping for the 10 rib jackshaft sound?

Chris

you can put me next in line for those two od pulleys (minus the sc pulley)

also, whats the deal with the chip? what is it tuned for do you know?

mywhite89
06-22-2013, 02:28 PM
you can put me next in line for those two od pulleys (minus the sc pulley)

also, whats the deal with the chip? what is it tuned for do you know?

So you want the 10% crank and the 5% jackshaft. Check out my original thread, just revised $175 for crank pulley.

The chip is tuned by Dave dalke to my old set which was uncoated mpx, 15% overdrive, custom cam bigger valves heads, headers back exhaust, all the bolt ons, 85mm throttle body, 60lb injectors, 80mafs, meth inj, 5-speed car. Pretty big shoes to fill, but you always have it retuned to your car which is recommended regardless of what you have done.

Chris

WhiteSC89
06-22-2013, 02:40 PM
Will the Brakes work for an 89 sc? Are they front or rear?

mywhite89
06-22-2013, 02:48 PM
Also have a used stock clutch for sale. Clutch works great. I switched it out because my car makes 425+rwhp and I switched to a centerforce dual friction last week. You can see from the pressure plate she got hot a few times. Unless I launched it pretty hard at the track with M/T's, this clutch held my 400+ powered SC through without issue. If I had another 5-speed car that needed a clutch, I would not hesitate to stick this thing in their, that's my opinion knowing the job it takes to do the job. Engagement is very smooth, no vibration, no noise. $40 plus shipping(heavy). BTW, I bought this clutch new and it has less than 10k miles on it.

Chris

rzimmerl
06-22-2013, 02:57 PM
Chris how much for the march alt and water pump pulley, and do you have the upper and lower rear seat in black?

Wzenheimer
06-22-2013, 03:54 PM
-3 piece set stock size aluminum crank, water pump, and alternator pulleys. These are stock size and very lightweight. Make me an offer

Chris

Do you still have these?

David R.
06-22-2013, 11:10 PM
So you want the 10% crank and the 5% jackshaft. Check out my original thread, just revised $175 for crank pulley.

The chip is tuned by Dave dalke to my old set which was uncoated mpx, 15% overdrive, custom cam bigger valves heads, headers back exhaust, all the bolt ons, 85mm throttle body, 60lb injectors, 80mafs, meth inj, 5-speed car. Pretty big shoes to fill, but you always have it retuned to your car which is recommended regardless of what you have done.

Chris

I'd like the crank and jackshaft pulleys, if they work for me. My 10 percent march pulley (I think march) is the stock 7 rib. I dont think that will work, will it? If not, do you know if anyone makes 7 rib crank and jack shaft pullies, or should I be looking for a 10 rib sc pulley? Do they just make them 10 rib to gain surface area to reduce belt slip?

Those are bigger shoes than I am looking to fill for some time, but I will need a chip for my time when I start putting on my aquired parts. Is there a limit to the number of times a program can be burned on your chip? I know some of them have something like that.

thanks

mywhite89
06-23-2013, 01:16 AM
I'd like the crank and jackshaft pulleys, if they work for me. My 10 percent march pulley (I think march) is the stock 7 rib. I dont think that will work, will it? If not, do you know if anyone makes 7 rib crank and jack shaft pullies, or should I be looking for a 10 rib sc pulley? Do they just make them 10 rib to gain surface area to reduce belt slip?

Those are bigger shoes than I am looking to fill for some time, but I will need a chip for my time when I start putting on my aquired parts. Is there a limit to the number of times a program can be burned on your chip? I know some of them have something like that.

thanks

The 10% crank is the same amount of ribs on each side as stock. The jackshaft is 10 ribs to the blower pulley, so the blower pulley is 10 as well. You can buy just the crank and be good to go. Or you can buy the jackshaft and blower pulleys and have a 10 rib setup for 15% overdrive. The extra ribs are to help prevent belt slip. Ive never heard of a limit for burning a sct chip
Chris

David R.
06-23-2013, 02:58 PM
Ive never heard of a limit for burning a sct chip
Chris

Must be me being a noob. Ill take the jack shaft and clutch if you've still got it. How much shipped to 80831?

SuperCoupe
06-23-2013, 09:33 PM
definitely interested in the stock size aluminum pulleys if still available. Please shoot me a pm to discuss if they are. (I may not be able to reply until after work tomorrow)

I see it says you have a buyer, but if that falls through, please let me know. I have been trying to find these for some time now. Just wish I'd seen your post sooner!

Thanks,
Jeff

mywhite89
06-25-2013, 07:23 PM
The brakes are fronts and require 92+ front spindles. I believe everyone has been responded to at this point!

Thanks,

Chris

I've updated the list, items sold are no longer pictured or even listed. Still a bunch of good stuff for sale. Pm me for anything that interests you.

mywhite89
07-10-2013, 05:56 PM
Bump to the top, still good stuff for sale. Shoot me offers and all will be considered.

Chris

figulaz
07-10-2013, 08:31 PM
PM sent 4 AC delete

mywhite89
07-11-2013, 05:14 PM
PM sent 4 AC delete

Responded, thanks.

mywhite89
07-13-2013, 03:23 PM
Ok, 25% overdrive 10 rib pulley kit is no longer available as a set. I still have the 10% crank pulley.

I recommend the 10% crank pulley for a good sleeper look and so you can retain the factory blower pulley for less belt slip. It is a good bolt on part, that is half the weight of the factory pulley.

Chris

mywhite89
07-21-2013, 06:35 PM
Bump to the top. Still some more stuff

mywhite89
08-01-2013, 12:38 PM
Still have upgraded brakes, a SCT chip, and a 10% overdrive lightweight crank pulley. Everything else is sold. Grab it up, make me an offer. I can deliver to the shootout..........

Chris

mywhite89
08-06-2013, 02:17 PM
Bump for final updates to this thread.

Chris

coupe crazy
08-06-2013, 04:24 PM
I will take the pulleys. Sending you a pm.

mywhite89
08-06-2013, 04:33 PM
I will take the pulleys. Sending you a pm.

Pm sent back

mywhite89
08-13-2013, 02:12 PM
last call for some upgraded brakes for dirt cheap.

chris

mhaddad87
09-17-2013, 12:11 AM
will the upgraded brakes work for a 95 sc or are is there no advantage to swapping.