I am adding an air ride system to my F100-SC and need to tap into the electrical somewhere. The compressor requires a 30 amp fused circuit and the solenoids to the air valves will require a separate 15 amp fused circuit.
What is the best way to add these circuits?
I have abandoned several items during my build, including the ride control system, the ABS and the passive restraint. However, I cut those circuits at the front left hand kick panel terminal. Would any of these be ignition activated and not interfere with other stock electrical items?
Thanks,
John L.
What is the best way to add these circuits?
I have abandoned several items during my build, including the ride control system, the ABS and the passive restraint. However, I cut those circuits at the front left hand kick panel terminal. Would any of these be ignition activated and not interfere with other stock electrical items?
Thanks,
John L.