MAF housing Identification

JeepsterSC

Registered User
Do the factory MAF housings have a part number cast into them?

I have a MAF from a 93 that I believe to be either a 70 mm '91+ factory MAF housing, or a C&L 73 mm MAF housing (previous owner claimed that its a c&L). There is no part number cast into the housing, just one of those circular line and number things that typically denote date of manufacture on the connector side of the housing, and Japan cast into the bottom
 
That would confirm my suspicion that this thing is just a factory housing. The Tamper Torx bolts that hold the sensor to the housing are also a give-away. If I were changing the housing I would change those out to phillips head
 
Back
Top