rickbtbird
Registered User
I got a 95 sc and I'm trying to research the black o-ring on the oil drain plug. No luck so far.
I got a 95 sc and I'm trying to research the black o-ring on the oil drain plug. No luck so far.
I'm trying to keep it original equipment.Huh. You know it doesn't have to be another black O-ring, right?
The bolt is a 12mm bolt - but a 1/2" drain plug gasket will also fit fine (1/2" is approx. 12.7mm).
RwP
I'm trying to keep it original equipment.
Me? I just glob on a nice ring of Black silicon RTV, let it set up, and install the drain plug back. No drips.. no leaks.. no errors. Silicon RTV = greatest thing since duct tape.(Me? I'd rather have a nylon gasket I replace every time, so it seals better.)
RwP
OK - Then I'd call the Ford dealer.
The gasket itself does not seem to be available separately, but the part number my digging turns up for the gasketted drain plug is E9DZ-6730-B . The actual number may be different.
(Me? I'd rather have a nylon gasket I replace every time, so it seals better.)
RwP
OK - Then I'd call the Ford dealer.
The gasket itself does not seem to be available separately, but the part number my digging turns up for the gasketted drain plug is E9DZ-6730-B . The actual number may be different.
(Me? I'd rather have a nylon gasket I replace every time, so it seals better.)
RwP
I looked up that part number and it does not seem to be the correct 95 SC part plug/ gasket. I think it should be F5RZ-6730-B (Replaced By: YS4Z-6730-AA)?
If it was me I would go for the FEL-PRO gasket # 72515. $0.86 at RockAuto.