JT's03
Registered User
Got this gm 3 bar I intend to wire up for data logging purposes. Has 3 wires
Brown (ground)
Orange (map signal)
Yellow (5v)
It's obvious where the brown wire goes but unsure on where to hook up the other 2. Sct 6.5 already has the gm 2 and 3 bar maps programmed into the analog equations so I might be good on that. (*v9.78)-14.7 is their equation.
any help is appreciated!
Brown (ground)
Orange (map signal)
Yellow (5v)
It's obvious where the brown wire goes but unsure on where to hook up the other 2. Sct 6.5 already has the gm 2 and 3 bar maps programmed into the analog equations so I might be good on that. (*v9.78)-14.7 is their equation.
any help is appreciated!