PDA

View Full Version : Keyless Entry Issue



jjklongisland
08-05-2013, 09:43 AM
OK, so I found the sticker for the factory 4 digit code on the hinge of the trunk. I cannot get it to work. The keyless entry pad does lock the doors so it does have power. Any suggestions?

RalphP
08-05-2013, 09:50 AM
OK, so I found the sticker for the factory 4 digit code on the hinge of the trunk. I cannot get it to work. The keyless entry pad does lock the doors so it does have power. Any suggestions?

The factory code is a 5 digit code.

Also, if you remove the cover over the keyless entry module (in the trunk, by the inertial switch), then remove the keyless entry module from the cover, you can see a label on IT with the code. This may not be the same as the one on the hinge, if it's ever been replaced.

RwP

jjklongisland
08-05-2013, 10:09 AM
So its a 5 digit code... hmmm I thought it was 4. Either way I guess I will look at the module. thanks...

TbirdSCFan
08-05-2013, 01:06 PM
You can guess at the missing digit. ? + 4 known numbers or.. 4 known numbers + ?

jjklongisland
08-05-2013, 08:16 PM
Got it working... My eyes were playing tricks on me... There was 5 digits on the truck sticker... I swore I only saw 4. Works like a champ...