PDA

View Full Version : Power seat motor help



animalguy10
08-17-2013, 06:08 PM
Hey guys. Power seat motor crashed it died all the way back so taking out the rear bolts was .... Well fun.
Anyway the seat is out. I see there is three motors for three functions. First question...
Where do I get a motor
Second is it one pack ?

And how the heck does it come off the seat ?

ALS35
08-21-2013, 12:47 PM
Hey guys. Power seat motor crashed it died all the way back so taking out the rear bolts was .... Well fun.
Anyway the seat is out. I see there is three motors for three functions. First question...
Where do I get a motor
Second is it one pack ?

And how the heck does it come off the seat ?

Just went through the same program for the last 3 days. Getting the seat out was really special.
The whole rack, with the motors comes off the seat bottom with four bolts.
I changed my whole rack with a replacement from a later model that I had.
Turns out that the problem with the seat was the switch assembly.
I would go that route (different switch assembly) before you condemn the motors.
If all else fails I have a rack with motors that works. You're welcome to it. It's from my 93.
Alan
Almost forgot ... it's the drivers side.

S_Mazza
08-21-2013, 01:46 PM
The motor is fairly long-lived. Things that more commonly fail are:

- Coins jammed in the tracks
- Dry grease jamming the tracks
- Pinched wires shorting near the switch
- Gearbox cracks and worm gear teeth skip past each other
- Circuit breaker tripped

animalguy10
08-22-2013, 06:36 PM
my track motors are done for sure can I come grab yours..? where you located I need on asap