Where Do I hook up an aftermarket sender for Auto Meter gauge?

SCYALTR

Registered User
Hello,
I have a Oil Pressure gauge from Auto Meter and need to find out where to hook up the sender.
Any info would be helpful.
Thanks,
D Rainer
 
Thanks for the info guyz

Hello Boyz,
Thanks for the information but I don't have a clue where the OEM sender is.

Thanks again.
D Rainer
 
if you look between the water pump and the p/s pump u will see the sensor it might have a black top or a gray top with 1 wire going to it it screws in to the engine
 
David, facing the front of the engine, it's screwed into the block to the left of the alternator. Probably a slip-on connector onto a threaded stud projecting from a plastic top on a cylindrical sender.

HTH
 
Back
Top