PDA

View Full Version : Where does the other end go?



89tbirdsc
11-30-2013, 06:20 PM
I just finished up replacing my motor mounts and WP. Got everything put back together, and was doing the final check to ensure I didn't miss anything... Lo and behold! This tiny tubing (vacuum?) at the extreme top driver's side is only connected on the end pictured. Where does the other end go?

Thanks in advance!
-Travis

Falcon20x
11-30-2013, 08:12 PM
I just finished up replacing my motor mounts and WP. Got everything put back together, and was doing the final check to ensure I didn't miss anything... Lo and behold! This tiny tubing (vacuum?) at the extreme top driver's side is only connected on the end pictured. Where does the other end go?

Thanks in advance!
-Travis
The throttle body inlet has one (next to the plug see picture 2), the other one is attached to the servo

http://i270.photobucket.com/albums/jj116/falcon20x/IMG_1597_zps8b218c51.jpg (http://s270.photobucket.com/user/falcon20x/media/IMG_1597_zps8b218c51.jpg.html)

http://i270.photobucket.com/albums/jj116/falcon20x/IMG_1600_zpse0407d8d.jpg (http://s270.photobucket.com/user/falcon20x/media/IMG_1600_zpse0407d8d.jpg.html)

89tbirdsc
11-30-2013, 11:58 PM
Bingo!
The tube was melted... So the other half was still attached and looked ok. That'll teach me to assume. Thanks a ton!