PDA

View Full Version : fuel injector wire harness



figulaz
12-11-2013, 03:42 PM
Does anyone know what fuel injector harness will work with a 93 5 spd? The one thing I need i was cut with my go-ahead at the wrecker. I said "I'm sure my car has it...2 seconds I could've walked over there to unclip that thing:mad: Any way I need to know if all early model harnesses are compatible. I'm handy with a solder iron and shrink tubing. I can pickup the plug piece but that looks whack and computer tolerances might get funky.

XR7 Dave
12-11-2013, 06:46 PM
The early harness is different. You could use it but it will take some reworking. I recommend getting the right harness. I might have one but it's not pristine. Others probably have one too.

figulaz
12-11-2013, 10:03 PM
I was hoping to get a range of years and then post in the wanted to buy section. Does it need to be exactly a 93 harness as well as 5 spd? I think only about 1000 93 5 spds were made. My 92 auto looks similar but it could pin out different I suppose.