Differential

txsc

Registered User
Will an MN12 still roll with the differential removed? I have a parts car that I want to remove the differential from, but it still needs to roll. I assume the halfshafts are retained in the knuckles.

Cheers,

JD
 
Yes they will, I have a couple right now like that. I remove the halfshafts and calipers at same time. Makes them roll real easy
 
I highly suggest putting a large bolt through the rear wheel bearing or it is likely to fail by being rolled without it held together.
Alan
 
I highly suggest putting a large bolt through the rear wheel bearing or it is likely to fail by being rolled without it held together.
Alan

Not too worried about it; the car only has to roll far enough to get on a trailer so I can dispose of it. Good info for future reference if I need to roll a "keeper" though.

Thanks,

JD
 
Back
Top