PDA

View Full Version : Differential



txsc
12-27-2013, 11:21 PM
Will an MN12 still roll with the differential removed? I have a parts car that I want to remove the differential from, but it still needs to roll. I assume the halfshafts are retained in the knuckles.

Cheers,

JD

Kevin Leitem
12-27-2013, 11:43 PM
Yes they will, I have a couple right now like that. I remove the halfshafts and calipers at same time. Makes them roll real easy

txsc
12-27-2013, 11:48 PM
Yes they will, I have a couple right now like that. I remove the halfshafts and calipers at same time. Makes them roll real easy

Awesome; just what I needed to know! Out it comes tomorrow...

Dirtyd0g
12-28-2013, 04:13 AM
I highly suggest putting a large bolt through the rear wheel bearing or it is likely to fail by being rolled without it held together.
Alan

txsc
12-28-2013, 01:55 PM
I highly suggest putting a large bolt through the rear wheel bearing or it is likely to fail by being rolled without it held together.
Alan

Not too worried about it; the car only has to roll far enough to get on a trailer so I can dispose of it. Good info for future reference if I need to roll a "keeper" though.

Thanks,

JD