13" cobra rotors?

G

good to doo

Registered User
Hi all happy new year and the very best to all. I recently put mustang 2 piston calipers on my 95, a nice up grade for very little money. Now after reading here that some of you are running the 13" rotors, what parts will I need to do this job? Thanks. good to doo.
 
Mustang hubs to get the right bolt pattern, at least 17" wheels to clear the brakes (also mustang bolt pattern), and then of course the cobra rotors and cobra calipers.
 
Cobra 13" rotors, Cobra calipers with brackets, bango bolts, and 17" or larger wheels. To use the Tbird bolt pattern just redrill the rotors.
 
rzimmerl said:
Cobra 13" rotors, Cobra calipers with brackets, bango bolts, and 17" or larger wheels. To use the Tbird bolt pattern just redrill the rotors.
Click to expand...

ok, I thought the calipers are the same as the pbr,s I put on. What years did ford build the cobra parts I need? thanks.
 
You need calipers from a 96-04 Mustang Cobra, or an 03/04 Mach1. These calipers are also made by PBR, but are different from the 99+ V6 and GT calipers.
 
You must log in or register to reply here.
Back
Top