PDA

View Full Version : Access inside headliner?



KMT
01-09-2014, 06:42 PM
I need to stuff a module inside the headliner near the moonroof switch - the headliner around the moonroof switch appears to be glued to the inside of the metal roof near the top of the glass and retained/captured by the trim that surrounds the moonroof opening...if I pull that trim back, is the headliner glued there too or will it pull down an inch or so without damaging it and/or the trim?

BLOWN38
01-09-2014, 06:55 PM
If you pull the sunroof trim and the switch housing it should pull down no problems. I don't exactly remember when I did the roll bar but had no problems pulling the liner. I'll see if I have a pick with it out.

KMT
01-09-2014, 06:59 PM
Thanks that would save me a trip to the yard to rip into a donor for practice :)

- updated - Got it done, thanks for the info!