PDA

View Full Version : 340 stealth install....on the sender



89XR7TD
01-18-2014, 08:55 PM
Does anyone have pics with the 340 pump on the sending unit?

Thanks!

BLOWN38
01-18-2014, 10:40 PM
I got one can't post it now. I'll try later.

89XR7TD
01-19-2014, 06:51 AM
Ok Thanks Chris!!

BLOWN38
01-19-2014, 10:14 AM
Let's try this
http://i169.photobucket.com/albums/u216/blown38/Mobile%20Uploads/20131003_150011-1_zps89315a11.jpeg

89XR7TD
01-19-2014, 10:25 PM
I have a question....

The rubber cover goes over the fuel pump housing, then it's supposed to slide through
that little metal bracket and then the sock fits over the pump...
But the 340 pump I have is bigger and doesn't go through the metal
bracket...thought I might have to cut it off or trim it?

Thanks!

BLOWN38
01-19-2014, 10:29 PM
You can probably just bend it wider. Been a long time since I instsalled it so I don't recall.

89XR7TD
01-19-2014, 11:13 PM
Ok Thanks again brutha!!!

Hope to run into ya sometime this year!!!
Perhaps Carlisle or Shootout!

XR7 Dave
01-20-2014, 10:12 AM
You probably have the wrong pump. Aeromotive makes 3 versions. The right version is a direct replacement.

89XR7TD
01-20-2014, 09:20 PM
Crap!!! Do you happen to have a part # handy? So I can check
to see which one I have...I bought this off of someone unused!

Thanks!

89XR7TD
01-20-2014, 09:22 PM
To add, the sock on this kit looks to be smaller than the average stocker..

89XR7TD
01-20-2014, 10:03 PM
You probably have the wrong pump. Aeromotive makes 3 versions. The right version is a direct replacement.

Yep it's the wrong pump Damn!!!

Read up on these pumps and it's the one with the offset inlets
when it should be the one with the center inlets!!!