View Full Version : radiator question

02-06-2014, 04:12 PM
I am putting a fmic on and wanted to know a good size rad to put on. I seen someone put a stock v8 rad on and wanted to know if it will hold up and keep it cool any sugestions

Scott Long
02-06-2014, 05:37 PM
V8 radiator is way to thin if I recall. Griffin's are expensive. Measure the area and get a Be Cool radiator they are more cost effective. You'll probably have to make some mounting brackets or weld on some mounting tabs and put a nut and bolt through your support. You can also get creative with your inlet and outlet locations using pipe and cut hoses to make the thing flow to wherever you want.