Ported Late Model and MP plenum SOLD thank you

I have decided to sell my ported late model blower and MP Plenum
THERE IS ABSOLUTELY NOTHING WRONG WITH THEM
and im not in a rush to sell it because i dont need to but i will have no use for it and i dont have near enough house to store things lol

as a matter of fact i am driving the car with them ON and just made a video before i got home and will post plenty of pics and videos im not a professional at porting but i think i did a damn good job with it and it took me alot of hrs

I did the porting on both and the blower currently makes 19-20psi on 15% OD with Bare rotors on a stock 3.8 motor heads cam
IT WHINES LOUD i have not heard one this loud so far only MPXs and NO the silencer ports are Unmolested i did not want to risk case warpage
the blower has new fluid (fluid is about 1000 miles old)

the Snout does not leak glittery oil at all

the Rotor pack is a low mileage rotor pack from an unmolested blower 35k miles tops
the blower has perfect seals everywhere no leaks on Top nor inlet nor snout and it is already been worked to receive GTP rotors but since i went with high OD i decided to use bare ones but if you have a set of gtp rotors they will work with it you just need to relocate one dowel ON the gtp rotor pack

Not a professional at porting but i used an MP port design as my template and then i went and copied an MPX outlet then i re checked the inlet and outlet for smoothing and polishing months later

car is stock long block just bolt ons and stock rear 3.27s 2600stall you can check more on the garage as to whats done to it

videos
TODAYS video well last night
http://www.youtube.com/watch?v=dFt6ws6f17M&feature=youtu.be
Sep 21 2013
http://www.youtube.com/watch?v=W5LUHaT0m-A
Dec 29
http://www.youtube.com/watch?v=i8E-CBEykEM
Feb 20 2014


Jan 27 2014
http://instagram.com/p/jsb_QytFAy/
jan 13 2014
http://instagram.com/p/jH7A22tFKw/
DEC 13 2013
http://instagram.com/p/h4zIwctFNa/
DEC 7 2013
http://instagram.com/p/ho4iLZNFLn/
OCT 9 2013
http://instagram.com/p/fPIOI5NFPH/

i would like 500 OBO shipped for the MP plenum ported was being used with an 85mm TB and matched to a ported blower
also has all brass fittings NOT plastic ones and is NON EGR ITS painted red i know not everyone likes that so if you want i can re paint it black or silver at no extra charge or you can do it yourself

and for the blower i would like 400 OBO shipped ill throw in a 3% pulley as im more than likely going to use my current 5% BTM pulley to keep my car running Blower is RED and black and I will NOT re paint this as its a PIT@ lol sorry
it does NOT include my Raised Top btw

or both for 850 shipped OBO

Thanks for your time and interest!

more pictures

More pictures ...

last few pics i have more i can upload but ill do that later

What are you replacing the Mccharger with?

I assume the blower and plenum are still red?

Melon said:

I assume the blower and plenum are still red?

Click to expand...

Yes they are

Blower and plenum now SOLD thank you

Did someone use there tax refund to buy an mpx?

I dont get tax refund I actually pay a couple hundred bucks