joenintiesc
Registered User
Way back when I upgraded to MK8 spindles/end links on my 90 SC. Then I upgraded to Cobra brakes with SS brake lines in the front. Then a few weeks ago I took the Cobra setup an swapped it onto my 94 (and found out the SS lines would not swap over because the line side fitting is different).
So now I need to put calipers back on the 90 (after I swap out the ABS unit...).
I can't use the stock calipers I took off the 94, correct? They won't bolt up right, right?
If I were to buy new calipers from RockAuto since they're cheap enough, do I buy calipers for a 90, or for a 93, since I upgraded the spindles?
Or I could also go with the Mustang GT PBR calipers, preferably from 03 since the banjo bolts are the same? And just grind a bit of the spindle down?
Either case, I would also need rotors from a 93 SC, correct?
Lol, am I remembering all of this correctly?
So now I need to put calipers back on the 90 (after I swap out the ABS unit...).
I can't use the stock calipers I took off the 94, correct? They won't bolt up right, right?
If I were to buy new calipers from RockAuto since they're cheap enough, do I buy calipers for a 90, or for a 93, since I upgraded the spindles?
Or I could also go with the Mustang GT PBR calipers, preferably from 03 since the banjo bolts are the same? And just grind a bit of the spindle down?
Either case, I would also need rotors from a 93 SC, correct?
Lol, am I remembering all of this correctly?