philstad28
Registered User
Ok so yesterday I went to do the #14 wire cut trick on the ICRM because I noticed my car would run too hot in traffic. I cut the wire and then wired in a switch under the dash and went to try it out. I flipped the switch on and off and no fan . I can hear something click when i flip the switch but the fan doesnt want to come on at all. I ran 12v to the fan motor and it started to turn. What could be causing the fan to not work? Could it be the ICRM, a short, a fuse? Idk what to do right now. The car is a 94 so it has a hi and low speed fan. Any help would be greatly appreciated.
Thanks, Phil
Thanks, Phil