PDA

View Full Version : Head toruing



T-Bird SC
07-03-2014, 01:03 AM
Hey guys. so i found this:

(1) 50 Nm (37 ft. lbs.)
(2) 60 Nm (45 ft. lbs.)
(3) 70 Nm (52 ft. lbs.)
(4) 80 Nm (59 ft. lbs.)
CAUTION: Do not loosen all of the bolts at the same time, only work with one bolt at a time.


http://www.sccoa.com/forums/showthread.php?51912-Heads-Getting-Checked-amp-Surfaced-Saturday&p=332793#post332793

Apparently this torquing sequence is for a 1993. Will it still work for my 1995?

Thanks!

Tim Groth
07-03-2014, 10:20 AM
Hey guys. so i found this:

(1) 50 Nm (37 ft. lbs.)
(2) 60 Nm (45 ft. lbs.)
(3) 70 Nm (52 ft. lbs.)
(4) 80 Nm (59 ft. lbs.)
CAUTION: Do not loosen all of the bolts at the same time, only work with one bolt at a time.


http://www.sccoa.com/forums/showthread.php?51912-Heads-Getting-Checked-amp-Surfaced-Saturday&p=332793#post332793

Apparently this torquing sequence is for a 1993. Will it still work for my 1995?

Thanks!

It's the same for all 89-95 SC models.

-Tim

T-Bird SC
07-03-2014, 10:55 AM
It's the same for all 89-95 SC models.

-Tim

Thanks for the help!