Hey guys. so i found this:
(1) 50 Nm (37 ft. lbs.)
(2) 60 Nm (45 ft. lbs.)
(3) 70 Nm (52 ft. lbs.)
(4) 80 Nm (59 ft. lbs.)
CAUTION: Do not loosen all of the bolts at the same time, only work with one bolt at a time.
http://www.sccoa.com/forums/showthr...ked-amp-Surfaced-Saturday&p=332793#post332793
Apparently this torquing sequence is for a 1993. Will it still work for my 1995?
Thanks!
(1) 50 Nm (37 ft. lbs.)
(2) 60 Nm (45 ft. lbs.)
(3) 70 Nm (52 ft. lbs.)
(4) 80 Nm (59 ft. lbs.)
CAUTION: Do not loosen all of the bolts at the same time, only work with one bolt at a time.
http://www.sccoa.com/forums/showthr...ked-amp-Surfaced-Saturday&p=332793#post332793
Apparently this torquing sequence is for a 1993. Will it still work for my 1995?
Thanks!