it can be, i have all the orings if you need them. if i remember right you can just pull it apart. i think there are four o-rings.
Thanks for the info guys!
I will find out if that kit has the needed o-rings for the EVO.
it can be, i have all the orings if you need them. if i remember right you can just pull it apart. i think there are four o-rings.
They appear to be rubber. You can check at your local hardware store or NAPA and try to match them up to the O-ring selections they have. I don't know that moving up to Viton would gain you anything in that application.
If anyone can post the ID/OD sizes it would be awesome!