No clutch plate pins (dowels)

gr8ghost

Registered User
Aren't there three pins that keep the pressure plate from spinning? I just installed a high performance RAM clutch that I got at Summit some years ago. That pressure plate doesn't have hole for the pins. Are 6 grade 5 bolt going to hold it. I have a bad feeling I'm going to sheer those off. What do you guys think.
 
I have several flywheels and some have the pins and some don't. I would think that the bolts would be sufficient. The pins are rather small and I thought were just for alignment purposes. I also thought the bolts were 8.9s but not sure.
 
Mine are american. They have 3 scores. 8.9 would be better. I'll look for grade 8 bolts.
Thanks For the input.
 
Back
Top