Changing Front Hub and Brakes

SCrazy

SCCoA Member
So it looks like I'm going to bite the bullet and buy new front skinny wheels, do a hub swap to mustang pattern and upgrade to 4-piston Wilwood brakes that will fit under a 15" front wheel and match my rear brakes.

So before I go buying parts I want to make sure I'm getting the right junk.

Mustang front hubs and bearings from a '94-04 Mustang GT
Calipers and rotors for a '94-04 Mustang GT with the associated Mustang mounting brackets.

Do I have that right?
 
So it looks like I'm going to bite the bullet and buy new front skinny wheels, do a hub swap to mustang pattern and upgrade to 4-piston Wilwood brakes that will fit under a 15" front wheel and match my rear brakes.

So before I go buying parts I want to make sure I'm getting the right junk.

Mustang front hubs and bearings from a '94-04 Mustang GT
Calipers and rotors for a '94-04 Mustang GT with the associated Mustang mounting brackets.

Do I have that right?

Sounds right, the article is below on the upgrade.

http://www.tccoa.com/articles/mn12how-to/brake_upgrade/brake_upgrade.htm
 
Last edited:
Back
Top