PDA

View Full Version : Problem with fan resistor



6pak2go
11-17-2002, 11:41 PM
My fan for my heat and ac stopped working a couple of weeks ago. Before it broke, it was stuck on high no matter what I did. I was told it was a fan control resistor, and that it was located behind the glovebox. I took the glovebox out and could not find it. The resistor has some small coils on one side of it, and a place for a harness to connect to. Its mounted by two 8mm bolts. Does anyone know where this is located. I could not find anything in 3 different manuals I looked through. Its starting to get cold fast here in ohio.

Brandon

Thrty5thSC
11-18-2002, 01:35 AM
it's the 4 wire plug right under the motor held in by 2 bolts.
it's snowing here in NY.