PDA

View Full Version : Ignition lock wire needed see pictures



Falcon20x
12-28-2014, 10:51 PM
62634

I need the plastic piece on the side of the lock with the black wire coming off the side of it.

62637

The lock needs to be remove to slide the piece out

The black wire (behind the arrow on the drawing) goes to the plug that you can see on the side of the bundle of wires.

I need the grey plastic piece and the black wire attached to it

Thanks

kylecoz88
12-29-2014, 02:14 PM
I think I should be looking for that piece also. If I recall correctly mine was also loose the last time I had the column apart. If someone has two of these laying around I would also be interested AFTER the original poster has acquired one.

Kyle

Ken Seegers
12-30-2014, 06:50 AM
I still have a whole column from a car I am parting out. I can send you pictures later today.

Ken Seegers
01-02-2015, 06:30 PM
Attached is the picture.
http://i1291.photobucket.com/albums/b545/blckbrd1234/supercoupe%20parts/20150102_134033_zpsze5fzb5r.jpg (http://s1291.photobucket.com/user/blckbrd1234/media/supercoupe%20parts/20150102_134033_zpsze5fzb5r.jpg.html)