Flynner8009
Registered User
Can u take 4r70w tranny out swap with a t45 5 speed can it be done and what would have to done to do it? Need help
Yes it can be done, and I have done it several times. You need the trans, flywheel, clutch, and clutch fork. You will also need a second shifter to make a remote mount shifter to move it back about 6" so it comes up in the hole in the center console. You will also need a clutch slave cylinder for a 94/95 Chevy S10 4-cyl, and to make a bracket to mount the slave on the side of the trans to push on the Mustang clutch fork. You will need a clutch pedal and master cylinder from an SC, and a custom line made to go from the SC master to the S10 slave. You will also need a new driveshaft that is 56.5" centerline to centerline. The cheap way out for that is a steel driveshaft from a non-police crown vic. Also you will need a tune to turn off the auto trans functions.