TBirdJKC
Registered User
Just installed my vogland 1.6" lowering springs yesterday. I finished the fronts, rolled the car around a bit to settle the wheels and noticed it was sitting the same height as my stock worn rears. The front end was visably lower than stock, so I just assumed the rear springs were sagging quite a bit lower then I remembered. Replaced the rears. Dropped the car and noticed the rear is now sitting an inch lower than the front! Everything is new, strut mounts, struts, springs, rear isolators, shorter sway bar endlinks. Someone please tell me this is normal and the fronts will settle down. The distance from the ground up front is 27 7/8 and the rear is 26 7/8. The rear was saggy with the original suspension too. Any advice would be appreciated. As a side note, it drives great, smooth and tight.