Rolller Rockers

pearl95sc

Registered User
:rolleyes: :confused: :(

I know that i put this post before, but never got any responses.
So here it is simplified.

Could the 1.8 roller rockers from moranav6racing.com work on our cars. I know I often see that people have the 1.7 roller rockers, just wanted to know if we can step it up without worry.
 
Will they fit under the stock valve covers??

Also, will it make a difference for stock heads and cam. But every bolt on possible?

Does anyone have them that can verify a noticable difference?

Thanks,
Anthony
 
I have been told that the stock RR's are 1.72's so going to the 1.73's on a stock heads and cam would not make that much difference. You would probably get better results with going to the 1.8 RR's
 
Rockers

I'm not worried about clearance under the valve covers, there are always ways around that. I just worried about valve clearance. I will be upping my cam, and from what i figure, 1.8 rockers with that cam will put me at a .538 lift. I don't want to floor it and hear metal clanging and a motor blowin.
 
Back
Top