PDA

View Full Version : Performance parts



Miguel5671
01-15-2016, 02:57 AM
tokico illumina 2 shocks these are the ARC compatible type with 1.6" vogtland springs $529.00 plus ship used
rear springs are RED i think the shocks alone

aluminum 10% Jackshaft pulley
$115.00 FREE ship used

Mark 8 Fan $79.00
plus ship used early model 1 speed i believe

2 3.27 IRS pumpkins used stock $100.00 plus ship

pair fat half shafts
$89.00 plus ship

3 regular half shafts
$25.00 each + ship

3.5" alum dynotech driveshaft
520 shipped
To be used with AOD and it has the better 4r70w yoke already

Miguel5671
01-15-2016, 03:17 AM
Just to let people know

The 4" intake with slot maf bung QH and BE has been SOLD shipped
The driveshaft loop has been sold and shipped
The install kit,t lok clutch pack,pinion spacer and lpw irs cover with Cobra S spring have been sold and shipped
The Motor/blower,
Underdrive sci pulleys,
Fuel cell , AN lines fittings set up
200amp alt
ac compressor
80lb injectors
Billet idlers
Mp springs/tensioners
Tensioner covers
Extra AR pulley have been sold already
5% js pulley sold shipped
Magnaflow res pending
Livewires sold
Sct chip pending
Fmic set up and raybestos pro suspension kit sold
Stainless mandrel bend exhaust sold shipped
Turbochuck motormounts sold shipped
Cobra calipers with brackets 13" redrilled 4.25 drilled slotted rotors with stainless steel lines and rear slotted drilled rotors and new pads sold
Lpw deep trans pan sold
Raised top sold
Headers pending
500 sci eliminator JS pulley sold
Radiator sold
95mm TB sold
340lph fuel pump
Racetronix wire upgrade kit
Gibson tips
Alum arms with derlin bushings DLF perches
Autometer fuel rail gauge
Mtxl wideband
Phantom 2 gauges
Roll cage

Spencer
01-15-2016, 03:18 PM
Pics of headers please, thanks.

aroot1
01-15-2016, 05:54 PM
Sent you a PM

Thanks

Adam

Miguel5671
01-16-2016, 06:32 AM
Pics of headers please, thanks.

Pictures of headers.

JeffTBird93
01-16-2016, 11:03 AM
How many miles on the shocks? Would you be willing to separate from the springs?

Miguel5671
01-16-2016, 01:47 PM
How many miles on the shocks? Would you be willing to separate from the springs?

A good 20k
I don't know how to separate them from the front shocks
But if nobody is willing to buy eM like that I have I will eventually

Edit my car never even had 20k so im over estimating ot never had a working odometer but car ran 2-3 months a yr and was parked for close to 2 yrs straight

Miguel5671
01-16-2016, 01:50 PM
By the way sorry guys Friday Saturday and Sunday I work 15 16 hours a day so if I take a little while to reply just bear with me
Monday to Thursday I'm usually free before 4 p.m. so thats when i can check up on here more being i have bad reception at work i cant check the forum during work hrs

If u need to contact me asap text me 9567898404

JeffTBird93
01-16-2016, 04:56 PM
A good 20k
I don't know how to separate them from the front shocks
But if nobody is willing to buy eM like that I have I will eventually

You have any pics of the car with this setup? I never cared for the height of the Vogtlands, but maybe a second look wouldn't hurt.

Miguel5671
01-16-2016, 05:07 PM
You have any pics of the car with this setup? I never cared for the height of the Vogtlands, but maybe a second look wouldn't hurt.

I think so text me 9567898404 its easier



Btw guys the listings have been on fb for a few days before here is link theres pics there too
https://www.facebook.com/groups/133369289895/

pock1
01-16-2016, 09:56 PM
i'll take the borlas and the irs bushing. please post pics. thx tony.

cajun coupe 94
01-17-2016, 04:06 AM
I am interested in the raised top please call me 225-347-1630

sleeper bird
01-17-2016, 07:42 AM
I am interested in the raised top please call me 225-347-1630

not to try and derail the sales thread,i saw your area code you must live near me im in gonzales La

Miguel5671
01-18-2016, 06:30 AM
Some pics here

6481664817

Miguel5671
01-18-2016, 05:38 PM
i'll take the borlas and the irs bushing. please post pics. thx tony.

Sent picsto your cell

What is ur zipcode tony? Im trying to get u a ship quote
Items will be 21lbs
Box 26x 10x 12
From 78573 if u want to check on the shipping cause im heading off to work
Just text me

S4gunn
01-18-2016, 06:05 PM
A good 20k
I don't know how to separate them from the front shocks
But if nobody is willing to buy eM like that I have I will eventually

Tip on how to do this safely. Easiest is to take it to a shop with a wallmount setup but that's not needed.


1) Get a set of mcpherson strut clampsand place it on the whole assembly. This prevents the spring from launching out as you relieve tension.
http://www.autozone.com/test-scan-and-specialty-tools/strut-coil-compressor/oem-macpherson-strut-spring-compressor/70135_0_0/
2) Wrap the strut assembly in carpet or some strong cloth.
3) Loosen the top nut. Stand to the side so if something does launch out, it doesn't hit your chest. I just do this with an impact gun.
4) Finally, once you have the assembly disassembled, loosen the compressors on the spring.

Assembly is the reverse but I typically only compress the spring just enough to be able to thread the top nut on. I then remove the spring compressors, install the mess onto the car, and do the final tightening of the top nut once the strut is all bolted into place (you can use a jack to push upwards on the UCA to compress the spring when the assembly is on the car).

Miguel5671
01-19-2016, 03:22 AM
Fmic set up and raybestos pro suspension kit sold

Quarter horse and Binary editor sold

Borlas irs mounts pending

Miguel5671
01-19-2016, 04:17 PM
Sorry on the long waits
For responses or quotes guys i work 92hrs a week with no days off at a place with horrible wireless reception

Im running to try and get parts out and quotes
Thanks for the patience

Jackshaft pulley and driveshaft loop are shipped

Miguel5671
01-28-2016, 07:22 AM
Exhaust piping sold and shipped
Intake quarter horse and BE sold and shipped
Turbo chuck motor mounts sold and shipped
Fmic and suspension kit sold shipping that today
Big brake front kit rear brakes borlas and irs mounts sold boxed and ready to be shipped awaiting payment confirmation

Miguel5671
01-28-2016, 07:26 AM
Double post

chickencoupe
01-28-2016, 02:58 PM
Didn't catch that you had lcas for sale in your original post. They are offically off the table?

Miguel5671
01-28-2016, 10:26 PM
Headers sold

Miguel5671
01-28-2016, 10:28 PM
Didn't catch that you had lcas for sale in your original post. They are offically off the table?

Ssorry Yes they were not in the first batch list i added them i had quoted them to a few people it didnt happen then i found out the car im getting had steel arms and stock bushings so i will keep these for it

The other parts i had not listed was the big cobra brake parts they sold before i posted them