Rear wheels don't fit 20x10.5

As Micah posted in the other thread, he is running 20 x 10.5 on his car. I seem to remember you have to tie the E-brake cable away from the wheel and the tire selection is critical. Here's his post from the other thread.
Micahdogg said:
20's aren't too big. Edit = And since you are going to ask, the wheels are Concept One, 4.5 bolt pattern, 20X10.5+45 with 285 30 and 20X9+36 with 245 35's. Yes they rub(bed). The fender lips are rolled, and I had to use 1/8 spacers in the rear to keep the inside lip from grinding against the upper shock tower on full squat.

20141004_150302_zps20f8bb03.jpg

7340097830_f43b2653b9_c.jpg
Click to expand...
 
So what offset are they? Tough for people to help or give suggestions when you post as little info as possible ... ;)

Also, keep in mind that once you have tires on them, and the weight of the vehicle when it's on the ground, the negative camber spec of the suspension will tuck the top of the wheel in a bit. / \
 
You must log in or register to reply here.
Back
Top