I have a parts car here, and the last thing I want out it is the engine an 5 speed. Will I be able to pull it all as 1, or do I have to split them. I do have an engine crane. Thanks in advance.
There's plenty of room to pull the engine and trans together out through the engine bay if you don't want to drop the K-member. I've done it several times, both in and out. Just make sure you remove the shifter!
If this is a parts car that you are sending to the junkyard after you pull the motor and trans, then just take a sawzall and cut through the rad support, and that will give you plenty of room to pull them as one unit.