PDA

View Full Version : Intermittent CEL



rickbtbird
07-29-2016, 05:43 PM
Intermittent CEL normally as the engine is warming up to temperature. Then it typically goes away. On my way back from the store today I got one so I put it on the tester.
KOEO test completed code 111, continuous memory said there was a 214, Cylinder Identification (CID) sensor - Circuit Failure.
KOER tested completed with code 111.

If continuous memory is correct, best I can tell this leads me to a cam sensor failure. I'll swap it out and wait a few days to see if it comes back.

rickbtbird
08-15-2016, 01:10 PM
Cam sensor was replaced last week. No CEL has happened sense that time.

KMT
08-15-2016, 01:23 PM
I had a similar situation - replaced 3 yr. old cam sensor and problem(s) went away, then came back after two months. Guess it's time to swap it again...