PDA

View Full Version : Rear Hubs



TBirdJKC
09-18-2016, 06:10 PM
My rear passenger side hub decided to crack into several pieces on me a couple of nights ago and I can't seem to find replacements anywhere. Does anyone know of a company that still makes these? I don't want to swap to cobra hubs.

nanatothesixth
09-18-2016, 06:37 PM
just google them,and you will see choices.

no164ford
09-18-2016, 07:59 PM
Rock auto has them motocraft for about 100 bucks I checked. Or post an ad under parts wanted.

nickleman60
09-18-2016, 08:04 PM
Or hit up a local junkyard and buy the knuckle/hub assembly used, probably $30-$40.

TBirdJKC
09-18-2016, 09:56 PM
Or hit up a local junkyard and buy the knuckle/hub assembly used, probably $30-$40.

Checked the local yards yesterday. No luck unfortunately.


Rock auto has them motocraft for about 100 bucks I checked. Or post an ad under parts wanted.

Can you shoot me a link. When I check all I see is the bearings for the rear when I select bearing/hub assembly.

Rodeo Joe
09-19-2016, 04:55 PM
Hope this (http://www.rockauto.com/en/catalog/ford,1993,thunderbird,3.8l+v6+supercharged,1140512 ,brake/wheel+hub,wheel+hub,7632) works! :cool:

Joe

TBirdJKC
09-20-2016, 12:58 PM
Hope this (http://www.rockauto.com/en/catalog/ford,1993,thunderbird,3.8l+v6+supercharged,1140512 ,brake/wheel+hub,wheel+hub,7632) works! :cool:

Joe

Thank you! I cant believe I missed that! I've ordered from two different places now and they sent me fronts for a Taurus/Windstar which have a slightly different axle spline. At least I know Rockauto will sent me the correct units.

What brand bearing have you guys had decent reliability with? I was going to buy Timken, but I see SKF is what's currently on my old hubs.

nanatothesixth
09-20-2016, 05:08 PM
e bay #310665637611

bowez
09-20-2016, 06:27 PM
I put National on mine and but pulled out Timken--which I assume was factory.

Would say there anit a dime's worth of difference between the two.