PDA

View Full Version : Tons of parts for sale; lots of aftermarket go fast stuff



1FSTBRD
10-02-2016, 10:58 PM
If anyone wants some pictures, I can post some. Right now, I'm just listing what I have. I'm parting out my SC as well, and the deadline is Friday.....it gets towed away for scrap. It's a white SC with very good grey interior with leather/ tweed seats. Before anyone asks, the cowl is cracked. :D The guys that I bought the car off had put an XR7 spoiler on it, painted white, if it's of any interest to anyone.

I can swing a deal and knock some of the price off if more items are being bought at once. I live in Canada, so shipping/ customs will inevitably cost more.

The textured finish performance stuff is influenced by what Larry Meaux has done on some of his race engines. You can read more about it in this article http://hotrodenginetech.com/pipemax-creator-larry-meaux-on-race-engine-head-porting/

--used Ford 36 lb injectors $60

--used Ford 30 lb injectors $60

--K&N panel filter for use with stock airbox $25

--ported/ textured lower intake manifold. Got very far in with various porting tools into almost all of the difficult to reach places. $60

--ported/ textured return plenum. Gasket matched the outlet $40

--triple wrapped intercooler return tube. One layer (against the tube) is rubber, the middle layer is reflective foil tape, and the outer layer is header wrap $60

--almost new Airtex/ Wells water pump (comes with gaskets) $25

--recently bought remanufactured/ tested ECU (has code of "X1A2") $75

--almost new Standard ignition switch $20

Various sensors and things (might throw some of these in for free if you buy some other things)

--used Ford mass air flow electronics (ie: black box on top of the MAF)
--used cam sensor alignment tool (OTC)

95sc2810
10-02-2016, 11:10 PM
hi im interested in the blower and the injectors, and I'm not sure how to pm on here lol so if you could pm me id appreciate it

1FSTBRD
10-02-2016, 11:17 PM
Sure thing! Pm will be sent in a couple of minutes.

KMT
10-02-2016, 11:26 PM
'm not sure how to pm on here lol so if you could pm me id appreciate it

Requires minimum 10 posts....

1FSTBRD
10-02-2016, 11:48 PM
Requires minimum 10 posts....

Yup, looks like I can't PM 'ya.

I bought the blower/ plenum off a fellow member here a couple of years ago for about $300, it had the ported 75mm opening in the plenum. I had fully ported it myself (used lots of extension tools), and opened the already ported blower up more. Does $300 sound reasonable? The injectors were $355, bought a couple of months ago, does $200 sound reasonable? The pulley and belt, does $50 sound reasonable for both? $550 for all?

95sc2810
10-03-2016, 12:07 AM
Thanks for helping me out with the info i appreciate it. how many miles is on the blower?

95sc2810
10-03-2016, 12:11 AM
Also, how much are you looking to get for the Double IC?

1FSTBRD
10-03-2016, 12:17 AM
I'm not sure how many miles are on the blower (I had never got--nor asked--the mileage), but I've only driven mine in summer, and half a week to work and back. I'd say about 5-6 thousand kms that I've personally put on it. The rotors are in great shape. It was efficient enough in its output to run 15 psi and give tiremarks down the street like in my avatar, on 30 lb injectors (but with a double intercooler) and stock heads/ cam. When I took a look at the FelPro replacement head gaskets and the pistons, there wasn't even a hint of detonation or gasket failure. Imagine that. :D

I'll take some pictures of it in the next hour and post them here.

1FSTBRD
10-03-2016, 12:19 AM
Double IC with the fan--how's $200?

95sc2810
10-03-2016, 12:21 AM
Sounds great man! Cant wait to see the pictures... I'll take a look at them and ill let you know. Id gladly do 350 for the blower and pulley. (maybe throw in the double ic) ;) lol thanks man

95sc2810
10-03-2016, 12:23 AM
Im mostly interested in the blower,pulley, and ic. So I'm confident we can work out a deal. Seems fairly priced.

1FSTBRD
10-03-2016, 01:11 AM
Apologies for the gasket maker still on the gasket surfaces--I literally took these off just a few hours ago.

Inlet into the intake plenum:

66210

Blower outlet (you can see a little bit of the textured finish....hard to totally capture with the camera) and the rotors are in excellent shape:

66211

Jb Welded part. Looks like a crack in there, but it's not....just where the JB Weld overlaps:

66212

Someone had painted the intake plenum silver before I had got it:

66213

Double intercooler with fan:

66214

95sc2810
10-03-2016, 01:45 AM
How much would shipping be to Las Vegas? if not to much i think i might have to jump on this deal.

1FSTBRD
10-03-2016, 08:26 AM
I have to go to work now, but after I get home, I'll figure out the shipping. It would be two packages.

DrFishbone
10-03-2016, 12:37 PM
How much do you want for the:

1) QH?
2) DIS module?
3) Oil separator? Do you have a model # or picture?
4) Cam sensor?
5) TPS?
6) I'm looking for a 10% OD Blower pulley too....I know you said you'd like to keep complete though. If you'd reconsider, let me know.

chickencoupe
10-03-2016, 01:02 PM
How much for the maf?

1FSTBRD
10-03-2016, 01:27 PM
How much for the maf?

How's $75?

1FSTBRD
10-03-2016, 01:36 PM
How much do you want for the:

1) QH?
2) DIS module?
3) Oil separator? Do you have a model # or picture?
4) Cam sensor?
5) TPS?
6) I'm looking for a 10% OD Blower pulley too....I know you said you'd like to keep complete though. If you'd reconsider, let me know.

1) does $150 sound fair for the QH?
2) $25 for the dis with the bottle of compound?
3) $70 for the oil separator? It's for a Mustang, but it worked well on my SC. I mounted mine right by the front airbox (right next to the rad), but I had also removed my A/C. It also caught a lot of water vapour, too. I still have the box that it came in with the mounting hardware, in case you can figure out a better place to mount it
4) $10?
5) $10?
6) if the deal falls through with the blower, for sure.....I'll give you first crack at it

I'm still at work, and when I get home, i'll upload a picture of the Moroso and how I mounted mine.

BirdofPrey97
10-03-2016, 02:27 PM
IC fan shipped to 50021?

1FSTBRD
10-03-2016, 03:28 PM
IC fan shipped to 50021?

Someone had spoken for the DIC with the fan; if they end up not taking it, you get first shot at it.

1FSTBRD
10-03-2016, 03:29 PM
Also added to the original list: Powerbond Balancer--almost brand new.

frontl180
10-03-2016, 05:37 PM
Hello - How much for the Comp Cams cam and pushrods?

Thanks!

61T-Bird
10-03-2016, 07:37 PM
Hello,
I know I'm not first in line but would like to get the Quarterhorse if the first deal doesn't work out. Thanks.

1FSTBRD
10-03-2016, 07:59 PM
How much would shipping be to Las Vegas? if not to much i think i might have to jump on this deal.

Hey bud, for two packages via UPS, it's $130.41 (not including customs charges). That's Standard shipping, which would get to you in a week. My calculations are as follows: 89101 zip code (I used a couple of different ones and came up with the same total), 1 parcel for the blower/ plenum belt is 30 lbs, and it's 24" x 18 x 9, and the double intercooler with fan is 20 lbs with 20x9x10 dimensions. That's for the valuation of what the deal is, at $550 total between the two.

To play devil's advocate, I gave the packages a value of $50 each, and it dropped to $115, so by putting a lower value, you don't really save very much. Bear in mind that your US dollar to the Canadian dollar is $1.31 right now, so that's pretty great for you all in the US. :D

1FSTBRD
10-03-2016, 08:15 PM
How much do you want for the:

1) QH?
2) DIS module?
3) Oil separator? Do you have a model # or picture?
4) Cam sensor?
5) TPS?
6) I'm looking for a 10% OD Blower pulley too....I know you said you'd like to keep complete though. If you'd reconsider, let me know.

Here's the Moroso:

66216

Installed on my car:

66217

It's an 85474 universal air/ oil separator--the official picture is this one. They're made really well.

66218
66228

Moates QH--there's even a fancy ~~~ pen in there that i've never used! :D

66219

1FSTBRD
10-03-2016, 08:26 PM
Hello - How much for the Comp Cams cam and pushrods?

Thanks!

How does $250 sound? I still have the cam card and grind specs from it:

66220

95sc2810
10-03-2016, 08:40 PM
Hmmm, I'll think I'll pass on the intercooler,



Also, would 280 be good for the sc/plenum and pulley/belt? I'm tight on money Just trying to get my 95 running strong.

What would be final price including shipping for just the SC? To 89104 (forgot to mention that I'm sorry)

1FSTBRD
10-03-2016, 08:55 PM
Hmmm, I'll think I'll pass on the intercooler,



Also, would 280 be good for the sc/plenum and pulley/belt? I'm tight on money Just trying to get my 95 running strong.

What would be final price including shipping for just the SC? To 89104 (forgot to mention that I'm sorry)

For $280, I could do the sc/plenum. The pulley/ belt, no. Shipping for just the one package for the blower is $80.83 CDN ($61.61 USD)

mhaddad87
10-03-2016, 08:57 PM
Hmmm, I'll think I'll pass on the intercooler,



Also, would 280 be good for the sc/plenum and pulley/belt? I'm tight on money Just trying to get my 95 running strong.

What would be final price including shipping for just the SC? To 89104 (forgot to mention that I'm sorry)

Didn't realize there were any other members in Las Vegas. If you need a hand with your bird or have questions, hit me up, I live in the summerlin area.

95sc2810
10-03-2016, 09:27 PM
Didn't realize there were any other members in Las Vegas. If you need a hand with your bird or have questions, hit me up, I live in the summerlin area.

I live on the east side! That awesome man it's hard to find any local tbird lovers.

95sc2810
10-03-2016, 09:28 PM
For $280, I could do the sc/plenum. The pulley/ belt, no. Shipping for just the one package for the blower is $80.83 CDN ($61.61 USD)


You think you could do 300 including the pulley?

1FSTBRD
10-03-2016, 09:39 PM
You think you could do 300 including the pulley?

Blower with pulley is $350. :D

mhaddad87
10-03-2016, 10:40 PM
I live on the east side! That awesome man it's hard to find any local tbird lovers.

Sorry op, don't mean to hijack your thread but this guy doesn't have his 10 posts so I can pm him.

95sc2810, i am getting my bird ready for its first outing in 7 years. Hit me up at 209 603 8614 if you are down to make a meet up out of it. I have some friends with other supercharged cars that usually come out.

1FSTBRD
10-03-2016, 10:51 PM
Sorry op, don't mean to hijack your thread but this guy doesn't have his 10 posts so I can pm him.

95sc2810, i am getting my bird ready for its first outing in 7 years. Hit me up at 209 603 8614 if you are down to make a meet up out of it. I have some friends with other supercharged cars that usually come out.

No worries!

95sc2810
10-04-2016, 12:47 AM
Blower with pulley is $350. :D

Is it okay if I think it over and get a definite answer by the end of tomorrow?

95sc2810
10-04-2016, 12:48 AM
Sorry op, don't mean to hijack your thread but this guy doesn't have his 10 posts so I can pm him.

95sc2810, i am getting my bird ready for its first outing in 7 years. Hit me up at 209 603 8614 if you are down to make a meet up out of it. I have some friends with other supercharged cars that usually come out.

Great, I'll definitely get in touch!

1FSTBRD
10-04-2016, 07:31 AM
Is it okay if I think it over and get a definite answer by the end of tomorrow?

Yeah, that's fine.

JeffTBird93
10-04-2016, 12:06 PM
How much for the ported heads? Also interested in the cam and pushrods if not claimed.

1FSTBRD
10-05-2016, 12:12 AM
How much for the ported heads? Also interested in the cam and pushrods if not claimed.

Heads, cam and pushrods are all sold now--sorry!

Djanzen
10-08-2016, 07:46 PM
I live in saskatoon and looking for some sc parts. do you any headers?

1FSTBRD
10-08-2016, 09:07 PM
I don't have headers, unfortunately.

mhaddad87
10-09-2016, 02:45 AM
Do you still have injectors and maf?

1FSTBRD
10-09-2016, 11:58 PM
Do you still have injectors and maf?

What size injectors? There's a sale tentatively pending for the 36 lbs, but I have the 42 and 30's left. I still have the MAF, as well.

sam jones
10-10-2016, 12:14 AM
Good evening

You have PM

mhaddad87
10-10-2016, 12:26 AM
What size injectors? There's a sale tentatively pending for the 36 lbs, but I have the 42 and 30's left. I still have the MAF, as well.

42 is what I was looking for, I need the matching calibrated maf.

1FSTBRD
10-10-2016, 12:39 AM
42 is what I was looking for, I need the matching calibrated maf.

How does $240 for the 42 lb injectors and MAF with 42 lb sampling tube sound?

mhaddad87
10-10-2016, 01:21 AM
How does $240 for the 42 lb injectors and MAF with 42 lb sampling tube sound?

what is the calibration on the maf? I have a 94 5 speed.

1FSTBRD
10-10-2016, 09:10 AM
what is the calibration on the maf? I have a 94 5 speed.

The MAF has a 42 lb sampling tube on it, so it's calibrated for 42 lb injectors.

DrFishbone
10-10-2016, 12:28 PM
1) does $150 sound fair for the QH?
2) $25 for the dis with the bottle of compound?
3) $70 for the oil separator? It's for a Mustang, but it worked well on my SC. I mounted mine right by the front airbox (right next to the rad), but I had also removed my A/C. It also caught a lot of water vapour, too. I still have the box that it came in with the mounting hardware, in case you can figure out a better place to mount it
4) $10?
5) $10?
6) if the deal falls through with the blower, for sure.....I'll give you first crack at it

I'm still at work, and when I get home, i'll upload a picture of the Moroso and how I mounted mine.

Thanks for the reply...looks like I snoozed on the QH. :(

Send me a PM if/when you'll sell the pulley separately. Some of the parts I asked about were just to build up spare parts inventory now that we may have 3 on the road soon.

mhaddad87
10-10-2016, 04:40 PM
The MAF has a 42 lb sampling tube on it, so it's calibrated for 42 lb injectors.

I could be wrong but my maf has a calibration written on it, it is a pro flow, so granted it is different. I thought I have read that cl mafs still have a calibration. can you send pictures, also is it for a late model sc then?

1FSTBRD
10-10-2016, 08:22 PM
I could be wrong but my maf has a calibration written on it, it is a pro flow, so granted it is different. I thought I have read that cl mafs still have a calibration. can you send pictures, also is it for a late model sc then?

As far as I know, the MAF's between the late model and the early models are all the same and are compatible--the electronics are the same and the MAF fits the stock airbox, but the only calibration needed is the sampling tube--and the proper 42 lb sampling tube is what I have on this. I had bought this MAF off of a fellow member here a couple of years back, and he had a late model car. Here's a picture of the MAF and 42 lb injectors.

You will need to tune your car for the 42 lb injectors, or it won't run properly.

66237

mhaddad87
10-17-2016, 04:46 AM
I think I am going to hold off for now. Just mulling over an e85 conversion and may go for different hardware. Thanks though.

mhaddad87
10-28-2016, 01:01 AM
OP, where in Canada are you? I am in Halifax till Monday, can I purchase the screaming demon coil and 42lb maf from you and have it by then? 110 for both?

Csirny
10-28-2016, 07:13 AM
Are the tensioners with the upgraded springs still available?

1FSTBRD
10-28-2016, 02:24 PM
OP, where in Canada are you? I am in Halifax till Monday, can I purchase the screaming demon coil and 42lb maf from you and have it by then? 110 for both?

I'm in Winnipeg but I doubt you'd get the stuff by Monday, without some sort of quick next day guarantee thing by some carrier. I can do $110 for the 42lb MAF and SD coil.

1FSTBRD
10-28-2016, 02:26 PM
Are the tensioners with the upgraded springs still available?

Yeah, they're still available.

mhaddad87
10-29-2016, 12:18 AM
I'm in Winnipeg but I doubt you'd get the stuff by Monday, without some sort of quick next day guarantee thing by some carrier. I can do $110 for the 42lb MAF and SD coil.

Ok, probably have to ship to Vegas then. Can you give me a quote to 89144? Thanks.

1FSTBRD
10-29-2016, 11:22 AM
Ok, probably have to ship to Vegas then. Can you give me a quote to 89144? Thanks.

The MAF is sold now (someone had got back to me after a week and I wasn't sure if they were still interested). Did you still want the coil?

mhaddad87
10-29-2016, 12:21 PM
The MAF is sold now (someone had got back to me after a week and I wasn't sure if they were still interested). Did you still want the coil?

Yes I do, coil should fit inside a padded envelope just fine right? Can you give me payment info please?

Csirny
10-29-2016, 12:36 PM
Pm sent about the tensioners

1FSTBRD
10-29-2016, 02:02 PM
Yes I do, coil should fit inside a padded envelope just fine right? Can you give me payment info please?

It should fit inside a large padded envelope, but I'd prefer to ship it in a cardboard box, just due to that the coil itself is pretty heavy and that there could be a whole lotta bad going on by the time you receive it. A box is much sturdier and I can still put some bubble wrap in the inside of it. When I had got mine through the mail, it was in a box. I have some errands to run, but I'll get you a total of how much shipping will be after I get back.

jdhughes9
10-30-2016, 10:36 PM
Is the spare rim/tire still available? Also, your location?

-josh

1FSTBRD
10-30-2016, 10:51 PM
Is the spare rim/tire still available? Also, your location?

-josh

The spare rim/ tire is still available (don't have the tire iron anymore, though). I live in Winnipeg, Canada.

BirdofPrey97
10-31-2016, 11:25 AM
Does the exhaust have the down tubes?

1FSTBRD
10-31-2016, 08:02 PM
Does the exhaust have the down tubes?

No, it doesn't.

1FSTBRD
10-31-2016, 08:15 PM
I should provide some clarity here and re-iterate that before people ask for quotes on shipping, realize this: I live in Canada. Seeing as that some have wondered why shipping from Canada costs more, shipping will naturally be higher, and customs is unfortunately always a part of it. It's just that much further away, and the shipping companies and Post will have to compensate for that.

If that is an issue, it is best that you order things either from Bill at SC Performance, or as they come up either locally (or on this forum from a closer location) where shipping is not an issue.

BirdofPrey97
10-31-2016, 10:33 PM
No, it doesn't.
I am confused. There isn't a front or a rear section to this but only the middle? Pictures available? Part number possible?

1FSTBRD
10-31-2016, 11:25 PM
I am confused. There isn't a front or a rear section to this but only the middle? Pictures available? Part number possible?

It's a pretty confusing thing. It's the middle part that goes around the gastank, meant for a narrow gas tank (ask me how I know this :D ). I had problems with a TruBendz kit, and ended up buying and using the wide gastank middle; hence why there's no rear section (there was never a front section.....it's from the resonator on back) as I'd used the rest of the original kit. I'm going to pull this from my list to eliminate confusion; I was hoping that someone would need it for some reason and didn't need to buy the whole kit, but it's looking like that's not the case. I've had these pipes sitting in my closet for a while collecting dust; i'm just gonna chuck 'em out and clear out some space.

BirdofPrey97
11-01-2016, 01:58 PM
It's a pretty confusing thing. It's the middle part that goes around the gastank, meant for a narrow gas tank (ask me how I know this :D ). I had problems with a TruBendz kit, and ended up buying and using the wide gastank middle; hence why there's no rear section (there was never a front section.....it's from the resonator on back) as I'd used the rest of the original kit. I'm going to pull this from my list to eliminate confusion; I was hoping that someone would need it for some reason and didn't need to buy the whole kit, but it's looking like that's not the case. I've had these pipes sitting in my closet for a while collecting dust; i'm just gonna chuck 'em out and clear out some space.

Found your old post. http://www.sccoa.com/forums/showthread.php?135664-92-95-exhaust-tubing-(narrow-tank)-and-Magnaflow-resonator-for-sale&highlight=exhaust

That helped clear it up. Let me know what you need for the piping shipped to 50201. I understand you are in CN and the shipping is a bit more.

sc-r
11-02-2016, 01:02 AM
Ill buy both tensioner's my jack shaft one went bad so why not replace both of Sc tensioner's. Please let me know if you still have them available i need buy them ASAP
my email is cali_joem@yahoo.com text me @ 760-684-1072 my name is Joe thank you.

1FSTBRD
11-03-2016, 12:42 AM
Ill buy both tensioner's my jack shaft one went bad so why not replace both of Sc tensioner's. Please let me know if you still have them available i need buy them ASAP
my email is cali_joem@yahoo.com text me @ 760-684-1072 my name is Joe thank you.

There's a pending sale on one tensioner, but would you still want the other one? I live in Canada (and assuming that you don't) so shipping will be higher than in the US.

sc-r
11-03-2016, 05:55 PM
There's a pending sale on one tensioner, but would you still want the other one? I live in Canada (and assuming that you don't) so shipping will be higher than in the US.
well i need the tensioner that go's to the bottom of the jack-shaft if you have that one ill buy it and how much is it for the shipping to 92345 zip code. Thank's

1FSTBRD
11-08-2016, 03:12 PM
I should also point out: you guys in the US, your dollar is worth almost 30 percent more than our Canadian one. I'm not sure of the exact conversion on your end, but I bought something online yesterday, and when converting to USD, it was .72 cents. :eek:

BirdofPrey97
11-08-2016, 04:20 PM
Have a part number for the Ford TPS sensors?

1FSTBRD
11-08-2016, 08:59 PM
Have a part number for the Ford TPS sensors?

It was the stock Ford one. It's a CTS, and the numbers stamped on it say 521 06677 90223, by the looks of it.

1FSTBRD
12-11-2016, 10:57 PM
Bump.....still have some stuff left. It's updated on the original post.

90birdsc
12-14-2016, 11:07 AM
price is for all 6 injectors? how much shipping?

1FSTBRD
12-14-2016, 08:21 PM
price is for all 6 injectors? how much shipping?

Price is for 6 injectors, yeah. Where do you live? Be forewarned that I live in Canada, and shipping will naturally be higher.

sc-r
01-04-2017, 04:34 AM
Did you end up getting rid of both Tensioners? I see in the orignal post you still have them.

1FSTBRD
01-05-2017, 09:25 PM
Did you end up getting rid of both Tensioners? I see in the orignal post you still have them.

They've been sold--sorry (I should have updated that).

bernie lomax
01-05-2017, 11:40 PM
hi, sent you a pm

plenum
01-15-2017, 06:23 PM
I need a Radio for my 1989 SC.

1FSTBRD
01-15-2017, 10:56 PM
I need a Radio for my 1989 SC.

I don't have a radio, sorry!

1FSTBRD
03-04-2017, 04:04 PM
I've updated the list on the first page and have removed the items that have sold, rather than jumble it up with a bunch of text from items that are no longer available. I've dropped the price to the ported blower with 10 percent OD pulley and corresponding belt to $300. I'm open to offers on the other stuff and if you buy some things, I can throw some items in for free, too. I need to clear out my workspace; someone can use these things somewhere, and I don't want to throw them out.

Broncojohnny
03-09-2017, 10:15 AM
Dumb question probably but this is a 94/95 blower? Also, are you in Canada? I want the blower but am trying to get an idea of shipping.

1FSTBRD
03-10-2017, 08:15 PM
Dumb question probably but this is a 94/95 blower? Also, are you in Canada? I want the blower but am trying to get an idea of shipping.

Blower is sold now.