PDA

View Full Version : SFI flexplate?



no164ford
01-25-2017, 01:35 AM
Looking around for a sci approved flexplate for 3.8 internally balanced aod SC. I know a few guys here have them just wondering what ones your running.

BLOWN38
01-25-2017, 10:38 AM
https://www.summitracing.com/parts/pma-pax28110/overview/make/ford oops missed the AOD.

Here are 2 that say they fit a mod motor with an AOD. https://www.summitracing.com/search/department/transmission-drivetrain/part-type/flexplates/make/ford/engine-size/4-6l-281/engine-family/ford-modular-v8/transmission-type/aod?N=4294949522%2B4294949315%2B4294951343%2B42949 51334%2B4294951335%2B4294945314&SortBy=Default&SortOrder=Ascending

Which it looks like the PA I originally posted would work too. I've been using the PA's on all the cars I've built. No problems from them.

SCrazy
01-25-2017, 10:53 AM
I've got TCI on my car....no problems

ScrapSC
01-25-2017, 01:20 PM
Guess it is a needed thing, just in case, to keep your foot/feet all in one piece.

SCrazy
01-25-2017, 02:55 PM
I got mine way back before it was required but I figured if I was buying a new one for the few extra bucks I might as well get the one with the sticker.

no164ford
01-25-2017, 05:24 PM
Thanks. And yea I don't like the idea of a flexplate letting go at 6000+ rpms 4 inches away from my feet.

ScrapSC
03-08-2017, 12:57 PM
Got mine in yesterday from Summit !!!

no164ford
03-08-2017, 09:07 PM
Got mine in yesterday from Summit !!!


I never got around to ordering one yet kinda forgot about it. What one did you get?

ScrapSC
03-08-2017, 10:22 PM
I never got around to ordering one yet kinda forgot about it. What one did you get?

Got the one that Vining was talking about. Going to order a set of the bolts as well...

rzimmerl
03-10-2017, 01:23 PM
Which one there are 3 total in the links??

http://www.performanceautomatic.com/customer_images/installation_31.pdf

PAX30210 looks to be SBF AOD 0 balance

rzimmerl
03-11-2017, 08:15 AM
https://www.summitracing.com/parts/arp-254-2901

Believe these should be the correct flywheel replacement bolts also.

BLOWN38
03-11-2017, 11:23 AM
Not sure what the difference is between the 28110 and the 30210 is. But I know Mark 8 flexplates and torque converters work on 94-95 SC's.

rzimmerl
05-05-2017, 12:44 PM
Ended up ordering this flex plate for trial https://www.summitracing.com/parts/pma-pax28110

And these ARP flexplate bolts https://www.summitracing.com/parts/arp-251-2901

no164ford
05-05-2017, 02:03 PM
Ended up ordering this flex plate for trial https://www.summitracing.com/parts/pma-pax28110

And these ARP flexplate bolts https://www.summitracing.com/parts/arp-251-2901

Let us know how you make out. I still never ordered one I keep getting deeper into my SC project I need to get it finished would like to get it to the shootout this year.

rzimmerl
05-19-2017, 07:30 AM
Mocked up parts on the bench last night and all parts listed in my last post will work as planned. The PA flexplate is 1.5mm thicker then the stock one so won't really know 100% on fitment until i drop the motor in tonight for clearance to the converter. Yes tonight 2 years and 7 months later its ready to go back in finally!!!:D

David Neibert
05-19-2017, 12:16 PM
Mocked up parts on the bench last night and all parts listed in my last post will work as planned. The PA flexplate is 1.5mm thicker then the stock one so won't really know 100% on fitment until i drop the motor in tonight for clearance to the converter. Yes tonight 2 years and 7 months later its ready to go back in finally!!!:D

Ryan,

Glad to hear it's going back together in time for the Shootout.

David