PDA

View Full Version : Any used performance parts for sale?



Nhra747
02-08-2017, 03:28 PM
Looking for blower parts (hats rotors etc)
Exhaust
Chips
Cams rockers etc
Seeing what's out there in the used aftermarket parts only

nickleman60
02-08-2017, 09:31 PM
Looking for blower parts (hats rotors etc)
Exhaust
Chips
Cams rockers etc
Seeing what's out there in the used aftermarket parts only



Where are you located? I have a complete exhaust system for an early gas tank style, I believe 89 to 91/92, for cheap but it's pick up only. If interested I can give more details.

BECERRASC
02-08-2017, 11:16 PM
Looking for blower parts (hats rotors etc)
Exhaust
Chips
Cams rockers etc
Seeing what's out there in the used aftermarket parts only


I have the following
Super chargers from 95
10% steel pulleys
1 jackshaft aluminum pulley
1 stock crank aluminun pulley
1 set of steel under drive pulleys set
1 set of aluminum under drive pulleys
1 bbk 70mm throttle body
1 b&m shifter
1 8" intercooler fan
1 accel coil
1 screaming demon coil
1 bhj early model harmonic balancer
And much more of stock parts

Who ever wants anything let me know

1FSTBRD
02-08-2017, 11:24 PM
Out of lots of stuff that I've sold, oddly enough, I still have a heavily ported late model blower with a 10 percent overdrive pulley, corresponding belt and with a ported plenum (for a 75mm throttle body). I'm not sure what the car would run in the 1/4 mile, but it had knocked about a full second off of a 0-60 time on a spirited drive down the highway, and the burnout marks in my avatar were certainly aided by the blower. :D I was asking $350 originally, but will drop it to $300. I can send you pictures if you want.

Koensig
02-09-2017, 04:49 PM
I have a performance exhaust (no mufflers, only resonator) for a 1992 era gas tank located in Michigan. Not sure what brand. I'll get pictures when it's less cold outside. I wouldn't be able to ship it though. Also a cold air intake and corresponding MAF.

sc91gt
02-27-2017, 03:19 AM
I have ported intake plenum and 70mm TB, High flow SC hat, 5% alum jackshaft pulley 5% aluminum SC pulley, CAI with 76 mm C&L MAF and much more