PDA

View Full Version : Various parts, Cervini hood, SC seats, 90SC partout



MadMikeyL
03-01-2017, 10:53 AM
I have a 90 SC that I am going to be parting out. Engine is blown, and I have already removed the blown engine from the car. The body doesn't look too bad, but the underside has rust issues, and that combined with the blown motor means it isn't worth fixing. I will likely be keeping the trans and exhaust, as well as a few other little things, but other than that, let me know what you need. Also for sale (some of which came off this car)

Fiberglass Cervini Mach1 style hood. This hood was already body worked and fitted to the car, and primed but never painted. I also drilled it for hood pins, since I don't trust fiberglass hoods at speed without them. Will fit 89-93 tbirds. $300 picked up.

Re-upholstered black vynil SC seats with rear fold-down. These seats were re-done with the vinyl kit from supercoupeperformance.com (kit was about $700). Both front seats and the rear bottom were re-done. The fold-down rear still has the factory leather in decent shape, but I do have the new upholstery kit for that seat, which will be included. $400 picked up for front and rear seats, plus the upholstery to do the fold-down rear.

Black dash, 2 small cracks on far right, no cracking across top as usually seen. Make offer.

Early style SC wheels in good shape $100 plus shipping for all 4

SC side skirts $100 plus shipping

Eibach 1.5" lowering springs $150 plus shipping

Gray tweed/leather SC seats in good shape, includes non-fold down rear. $200 picked up

Set of 93+ front spindles, required for brake upgrades on 89-92 cars $50 plus shipping

Factory 94/95 SC radiator. Bracket for intercooler has been removed. Radiator has the plastic end tanks. No leaks, make offer.

I have to go through my garage and see what else I have, and I will update the thread, including additional pics.

http://i49.photobucket.com/albums/f300/BlenderheadNJ/1CC77718-325E-44AF-8DD8-F693A0D05DC8_zpsumijrmtv.jpg (http://s49.photobucket.com/user/BlenderheadNJ/media/1CC77718-325E-44AF-8DD8-F693A0D05DC8_zpsumijrmtv.jpg.html)

http://i49.photobucket.com/albums/f300/BlenderheadNJ/B48FEB7E-D5F9-4F52-ABF3-1AFAEBC7B2D1_zpspamvry9h.jpg (http://s49.photobucket.com/user/BlenderheadNJ/media/B48FEB7E-D5F9-4F52-ABF3-1AFAEBC7B2D1_zpspamvry9h.jpg.html)

http://i49.photobucket.com/albums/f300/BlenderheadNJ/5F43435E-7676-4B66-B442-56E0A06919D0_zpsooviuvt1.jpg (http://s49.photobucket.com/user/BlenderheadNJ/media/5F43435E-7676-4B66-B442-56E0A06919D0_zpsooviuvt1.jpg.html)

http://i49.photobucket.com/albums/f300/BlenderheadNJ/C3A8729B-8E43-4D36-983A-4E4B0721F02D_zpsbohpkb1g.jpg (http://s49.photobucket.com/user/BlenderheadNJ/media/C3A8729B-8E43-4D36-983A-4E4B0721F02D_zpsbohpkb1g.jpg.html)

http://i49.photobucket.com/albums/f300/BlenderheadNJ/DD22F467-CC78-4A77-A953-4AD8AFD8C30B_zpsnbsun0wi.jpg (http://s49.photobucket.com/user/BlenderheadNJ/media/DD22F467-CC78-4A77-A953-4AD8AFD8C30B_zpsnbsun0wi.jpg.html)

ShawnSC1
03-01-2017, 09:53 PM
Hi do you still have seats?

pock1
03-01-2017, 10:53 PM
sup mikey ltns, i need a few parts. what r u asking for the passenger fender,both rear roof molding( on sides of the rear glass)? are those clear corners? let me know on price and if i need to drive up . thx tony.

MadMikeyL
03-01-2017, 11:19 PM
Hey Tony! They are clear corners, but I'm keeping those. How about $50 picked up for the fender and both roof moldings?

Shawn, yes the seats are still available.

bernie lomax
04-08-2017, 09:06 AM
hey boss, is the cervini hood still available? any issues with it? cracks/scratches? is there a number that I can call you? david.drake@sympatico.ca...I check my email more regular than the forum...thx...I tried to leave a pm but it says your inbox is full

JoeyICU
04-09-2017, 07:08 AM
dibs on the eibachs, the clutch pedal, and the shifter please.

I can meet you halfway

JoeyICU
04-09-2017, 07:23 AM
410-459-2635. Text or call me if you see this, I think this will expedite things, I am not going to allow a clutch pedal to pass me by again.

MadMikeyL
04-09-2017, 08:11 AM
Bernie, the hood is still available, and no, there are no issues or damage. Just bolt it on and go.

Joey, I will call you later today.

Dbarnhill
04-10-2017, 06:51 PM
I know you may not want to split it up, but I need the passenger side rear portion of the side skirt. If interested in selling me that piece by itself let me know!

TommyT
04-16-2017, 09:54 AM
Differential unit?

MadMikeyL
04-16-2017, 12:25 PM
The diff is a stock 2.73 trak-lok. I would let it go for $125.

TommyT
04-16-2017, 12:36 PM
The diff is a stock 2.73 trak-lok. I would let it go for $125.
Just for clarity as this will be used in another application, is the pumpkin cast iron?

MadMikeyL
04-16-2017, 12:39 PM
Yes, cast iron pumpkin, aluminum diff cover, 2.73 gear ratio, and limited slip differential.

TommyT
04-16-2017, 12:49 PM
Ok. Can you text me at 929- 283- zero six seven seven? In local in Howell, nj.

TommyT
04-17-2017, 07:54 AM
Waiting for a call or text.

Tommy

MadMikeyL
04-25-2017, 07:06 PM
Well the car is now gone. Here's what I have left
-Seats
-Rear L-braces
-Dash
-Early SC wheels
-Aluminum spare
-Early SC all red tail lights
-Side view mirrors
-SC side skirts with door inserts. No rips, but significant scratches on bottoms of skirts, and a few small dents in door inserts
-Good working auto seat belt tracks
-Clutch line
-Black early door and quarter interior panels
-94/95 SC shortblock, needs one rod and piston replaced, crank and stock cylinder bores still good
-5-speed driveshaft


Joey, I have the springs, clutch pedal, and shifter handle pulled for you, I just have to figure out when I'll have time for us to meet up. This coming weekend I won't have time, but probably over the weekend of May 5-7th.

pock1
04-26-2017, 09:32 AM
hi mikey i was kinda busy last few weeks, were u able to pull a pass fender/ and the rear roof molding?

MadMikeyL
04-26-2017, 05:30 PM
I forgot about the rear roof molding. The fender on that car was rotted out at the bottom, but I do have a good passenger fender in white if you want.

pock1
04-26-2017, 06:00 PM
I forgot about the rear roof molding. The fender on that car was rotted out at the bottom, but I do have a good passenger fender in white if you want.

Ahhh man,OK

BirdofPrey97
04-27-2017, 09:56 AM
I am too far away to pick the seats up, but if you are interested in removing the covers and shipping them please let me know.

JoeyICU
04-29-2017, 03:56 AM
Do you have any time on May 14/15th? If you don't I can chisel out some time for the May 5 -7 time frame.

MadMikeyL
04-29-2017, 08:36 PM
I have my son the weekend of the 14th, so that won't work. I could possibly do it on a weeknight too.

JoeyICU
04-30-2017, 04:47 PM
I guess I will just make time the weekend you said. weeknights don't work for me, I get up super early to open my shop every morning.

JoeyICU
04-30-2017, 05:06 PM
private message sent.

Ken Valk
05-01-2017, 10:48 AM
In need of the Emergency Brake handle for 90 SC 35th Annv. Edition 5 Speed.

Chevydillan
05-01-2017, 08:58 PM
Need the trans. How much shipped to 88012?

Gambit
05-15-2017, 02:21 PM
Hey are selling the shifter boot badly need one and the console and arm-rest let me know thanks

mitt1233
06-02-2017, 11:42 AM
I'd be interested in the seat covers if you're willing to take them off. mminton75@gmail.com

mitt1233
06-02-2017, 12:04 PM
I'm heading down to Wildwood for a wedding June 23rd. If you still have the seats I'd be interested in them. How my h were you selling the black leather ones for please?

patragz22
06-07-2017, 10:22 PM
I have a 90 SC that I am going to be parting out. Engine is blown, and I have already removed the blown engine from the car. The body doesn't look too bad, but the underside has rust issues, and that combined with the blown motor means it isn't worth fixing. I will likely be keeping the trans and exhaust, as well as a few other little things, but other than that, let me know what you need. Also for sale (some of which came off this car)

Fiberglass Cervini Mach1 style hood. This hood was already body worked and fitted to the car, and primed but never painted. I also drilled it for hood pins, since I don't trust fiberglass hoods at speed without them. Will fit 89-93 tbirds. $300 picked up.

Re-upholstered black vynil SC seats with rear fold-down. These seats were re-done with the vinyl kit from supercoupeperformance.com (kit was about $700). Both front seats and the rear bottom were re-done. The fold-down rear still has the factory leather in decent shape, but I do have the new upholstery kit for that seat, which will be included. $400 picked up for front and rear seats, plus the upholstery to do the fold-down rear.

Black dash, 2 small cracks on far right, no cracking across top as usually seen. Make offer.

Early style SC wheels in good shape $100 plus shipping for all 4

SC side skirts $100 plus shipping

Eibach 1.5" lowering springs $150 plus shipping

Gray tweed/leather SC seats in good shape, includes non-fold down rear. $200 picked up

Set of 93+ front spindles, required for brake upgrades on 89-92 cars $50 plus shipping

Factory 94/95 SC radiator. Bracket for intercooler has been removed. Radiator has the plastic end tanks. No leaks, make offer.

I have to go through my garage and see what else I have, and I will update the thread, including additional pics.

http://i49.photobucket.com/albums/f300/BlenderheadNJ/1CC77718-325E-44AF-8DD8-F693A0D05DC8_zpsumijrmtv.jpg (http://s49.photobucket.com/user/BlenderheadNJ/media/1CC77718-325E-44AF-8DD8-F693A0D05DC8_zpsumijrmtv.jpg.html)

http://i49.photobucket.com/albums/f300/BlenderheadNJ/B48FEB7E-D5F9-4F52-ABF3-1AFAEBC7B2D1_zpspamvry9h.jpg (http://s49.photobucket.com/user/BlenderheadNJ/media/B48FEB7E-D5F9-4F52-ABF3-1AFAEBC7B2D1_zpspamvry9h.jpg.html)

http://i49.photobucket.com/albums/f300/BlenderheadNJ/5F43435E-7676-4B66-B442-56E0A06919D0_zpsooviuvt1.jpg (http://s49.photobucket.com/user/BlenderheadNJ/media/5F43435E-7676-4B66-B442-56E0A06919D0_zpsooviuvt1.jpg.html)

http://i49.photobucket.com/albums/f300/BlenderheadNJ/C3A8729B-8E43-4D36-983A-4E4B0721F02D_zpsbohpkb1g.jpg (http://s49.photobucket.com/user/BlenderheadNJ/media/C3A8729B-8E43-4D36-983A-4E4B0721F02D_zpsbohpkb1g.jpg.html)

http://i49.photobucket.com/albums/f300/BlenderheadNJ/DD22F467-CC78-4A77-A953-4AD8AFD8C30B_zpsnbsun0wi.jpg (http://s49.photobucket.com/user/BlenderheadNJ/media/DD22F467-CC78-4A77-A953-4AD8AFD8C30B_zpsnbsun0wi.jpg.html)
What shape are the body side moldings? I think I dealt with you before, when, idk.

Creighton
06-07-2017, 11:15 PM
Anyone know who made that rear spoiler?
Thanks!
Creighton

DrFishbone
06-08-2017, 01:07 PM
Anyone know who made that rear spoiler?
Thanks!
Creighton

I don't know, but I have one that we may not use, if you're interested. I think we got it off of a 94-97 Thunderbird.

MadMikeyL
06-08-2017, 02:33 PM
As far as I know, I think it was a factory Ford spoiler.

Pat, unfortunately the car is gone at this point, and I didn't save the body side moldings. If I remember correctly, I think I pulled a 90 XR7 out of your back yard to use as my lemons racer, probably almost 10 years ago at this point. Was that you, or am I confusing you with someone else?

Creighton
06-08-2017, 03:48 PM
Thanks,
I have a Cervinis and picking up a factory one in a couple of weeks. This one the tips length look in between the others. Could just be camera angle.
Creighton

patragz22
06-08-2017, 07:11 PM
As far as I know, I think it was a factory Ford spoiler.

Pat, unfortunately the car is gone at this point, and I didn't save the body side moldings. If I remember correctly, I think I pulled a 90 XR7 out of your back yard to use as my lemons racer, probably almost 10 years ago at this point. Was that you, or am I confusing you with someone else?

you got it, nice to see you still here, thanks for reply