PDA

View Full Version : everything sold thanks!!



no164ford
03-21-2017, 11:11 PM
I am selling the front brake set up off my car everything was new less them 2 years ago and has less then 1,000 miles on them. This setup did help stop the car way smoother and quicker then the stock setup no problem from 130+ to 0mph. I am just changing over to a wilwood setup with mustang bolt pattern for my new setup.

All parts are now pulled I labeled everything to were it goes.

93+ spindles and hubs (Thunderbird bolt pattern) these were the only used parts I used (you have to have these to run mustang brakes) SOLD!!!!!!

2 Brembo rotors, minor surface rust from sitting (Thunderbird bolt pattern)
2 Mustang PBR calipers
2 PBR caliper brackets and hardware
Clips and banjo bolts
set of Power Stop z26 ceramic brake pads (I think these were 45.00 alone)
SOLD!!!!!!!!!!!!!!!"

I decided to keep the hoses for my Lincoln

tchicken
03-22-2017, 10:03 AM
Interested, sending a pm . . .

BLOWN38
03-22-2017, 10:33 AM
Next in line if these are the 13" setup.

no164ford
03-22-2017, 06:20 PM
Next in line if these are the 13" setup.

There not the 13" setup sorry

aroot1
03-23-2017, 06:36 AM
Also interested, but with couple questions.

Are the rotors cross drilled or slotted (figured you would have mentioned, but didn't know if Brembo even sold that weren't) ?

Are the lines braided or rubber (also figured you would have mentioned if so)?

If the answers are yes, please consider me in line for the rotors/calipers if the prev. guys decline. I will not need spindles/hubs.

thanks

Adam

no164ford
03-23-2017, 10:14 AM
[QUOTE=aroot1;1108283]Also interested, but with couple questions.

Are the rotors cross drilled or slotted (figured you would have mentioned, but didn't know if Brembo even sold that weren't) ?

Are the lines braided or rubber (also figured you would have mentioned if so)?

If the answers are yes, please consider me in line for the rotors/calipers if the prev. guys decline. I will not need spindles/hubs.

thanks

Adam[/QUOTE

There just plain rotors and rubber lines.and are still for sale

BUDXR7
03-25-2017, 02:11 PM
PM has been sent

no164ford
03-26-2017, 01:55 PM
Spindles and hubs sold!! Added photos

Matt_aka_Dale
03-27-2017, 04:34 PM
If the brake parts are still available, I'll buy them. Email me for more information. johnsonmatt15@gmail.com

no164ford
03-27-2017, 06:48 PM
If the brake parts are still available, I'll buy them. Email me for more information. johnsonmatt15@gmail.com

I sent you an email thanks Paul