PDA

View Full Version : Parts for free just pay shipping



HwyStar
05-27-2017, 12:35 AM
Take a close look at the three pictures here. If there is anything you want, let me know. Just pay shipping. I'm in VA 23061. The FelPro box are new TTY bolts. The Napa box is new rear pads. And, there are 4 new in box Bosch Platinum +2s. Everything here is early SC. I also have a good 99 up 7.3 PSD radiator, and a 6.0 PSD radiator with a small leak that can be easily fixed. If no one gets this stuff, I making a metal run to the recyclers with it. I'm going out to sea for two weeks as of Monday. So, I might be hard to get.

http://i48.photobucket.com/albums/f224/Windstarpro/IMAG0040_zpsyviame8f.jpg (http://s48.photobucket.com/user/Windstarpro/media/IMAG0040_zpsyviame8f.jpg.html)

http://i48.photobucket.com/albums/f224/Windstarpro/IMAG0041_zpsatzb5687.jpg (http://s48.photobucket.com/user/Windstarpro/media/IMAG0041_zpsatzb5687.jpg.html)

http://i48.photobucket.com/albums/f224/Windstarpro/IMAG0042_zpsh6dm594y.jpg (http://s48.photobucket.com/user/Windstarpro/media/IMAG0042_zpsh6dm594y.jpg.html)

S4gunn
05-27-2017, 01:12 AM
[QUOTE=HwyStar;1109773]Take a close look at the three pictures here. If there is anything you want, let me know. Just pay shipping. I'm in VA 23061. The FelPro box are new TTY bolts. The Napa box is new rear pads. And, there are 4 new in box Bosch Platinum +2s. Everything here is early SC. I also have a good 99 up 7.3 PSD radiator, and a 6.0 PSD radiator with a small leak that can be easily fixed. If no one gets this stuff, I making a metal run to the recyclers with it. I'm going out to sea for two weeks as of Monday. So, I might be hard to get.

http://i48.photobucket.com/albums/f224/Windstarpro/IMAG0041_zpsatzb5687.jpg (http://s48.photobucket.com/user/Windstarpro/media/IMAG0041_zpsatzb5687.jpg.html)

Sent you a PM about the M90 (if it's up for grabs).
-g

Falcon20x
05-27-2017, 08:10 AM
Interested in the automatic transmission inspection cover (showing between the water pump pulley and the piece of wood in the bottom of the picture)
Engine oil cooler and all the hoses, engine brackets( crankshaft sensor bracket and water pump bracket etc..) pretty much everything showing around the oil cooler. Except the ignition coils
Head covers (2)
Passenger and driver side engine brackets

HwyStar
05-27-2017, 10:51 AM
Thanks for the replies! I thought I was going to scrap it all, which I didn't want to do. I got your messages, and I will get everything together soon as I can. I'm out of time for now, but I will remember. I go out to sea for two weeks, and then I will be back. I will get everything together then and send it off. Sorry for any delay! I tried to do too much in too little time. Thanks guys!

davec73
05-27-2017, 01:29 PM
Ken wagner needs the intercoolers

kenewagner
05-27-2017, 02:27 PM
Take a close look at the three pictures here. If there is anything you want, let me know. Just pay shipping. I'm in VA 23061. The FelPro box are new TTY bolts. The Napa box is new rear pads. And, there are 4 new in box Bosch Platinum +2s. Everything here is early SC. I also have a good 99 up 7.3 PSD radiator, and a 6.0 PSD radiator with a small leak that can be easily fixed. If no one gets this stuff, I making a metal run to the recyclers with it. I'm going out to sea for two weeks as of Monday. So, I might be hard to get.

http://i48.photobucket.com/albums/f224/Windstarpro/IMAG0040_zpsyviame8f.jpg (http://s48.photobucket.com/user/Windstarpro/media/IMAG0040_zpsyviame8f.jpg.html)

http://i48.photobucket.com/albums/f224/Windstarpro/IMAG0041_zpsatzb5687.jpg (http://s48.photobucket.com/user/Windstarpro/media/IMAG0041_zpsatzb5687.jpg.html)

http://i48.photobucket.com/albums/f224/Windstarpro/IMAG0042_zpsh6dm594y.jpg (http://s48.photobucket.com/user/Windstarpro/media/IMAG0042_zpsh6dm594y.jpg.html)

Intercoolers to 68110.

Ken

Norm-L
06-08-2017, 09:04 PM
Hi, would you happen to have the center dash panel (for climate controls/indicator module/clock, etc)?

potshotscott
06-09-2017, 01:07 AM
HwyStar - what year is that rad/intercooler mount/fan for??? Is that the rad with the small leak?

HwyStar
06-19-2017, 04:56 PM
Hi, would you happen to have the center dash panel (for climate controls/indicator module/clock, etc)?

I'm not sure. I'm still organizing my parts building. If I find one, I'll send it.
Dave

HwyStar
06-19-2017, 04:57 PM
Interested in the automatic transmission inspection cover (showing between the water pump pulley and the piece of wood in the bottom of the picture)
Engine oil cooler and all the hoses, engine brackets( crankshaft sensor bracket and water pump bracket etc..) pretty much everything showing around the oil cooler. Except the ignition coils
Head covers (2)
Passenger and driver side engine brackets

I got your pile of stuff together. I'll mail it out tomorrow.
Dave

HwyStar
06-19-2017, 05:45 PM
Intercoolers to 68110.

Ken
Have the intercoolers boxed. PMd you.
Dave

MadMikeyL
06-19-2017, 06:35 PM
I'll take the cam sensor and the ignition coils. Let me know how much shipped to 07738. Thanks!

HwyStar
06-19-2017, 11:03 PM
I'll take the cam sensor and the ignition coils. Let me know how much shipped to 07738. Thanks!

Ok. Ill figure that out tomorrow! Thanks!
Dave

HwyStar
06-20-2017, 07:35 AM
Could someone pm me Ken's address? I need to send his stuff off while I have time to.
Dave

HwyStar
06-20-2017, 06:05 PM
Interested in the automatic transmission inspection cover (showing between the water pump pulley and the piece of wood in the bottom of the picture)
Engine oil cooler and all the hoses, engine brackets( crankshaft sensor bracket and water pump bracket etc..) pretty much everything showing around the oil cooler. Except the ignition coils
Head covers (2)
Passenger and driver side engine brackets

I have your stuff packed. UPS said $65 to ship. PM me your address and I will send it to you.
Dave

HwyStar
06-22-2017, 04:23 PM
I'll take the cam sensor and the ignition coils. Let me know how much shipped to 07738. Thanks!

Got it boxed. I just gave you the whole synchronizer and coils. Shipping is $13. I'll pm you.
Dave

stevenx40
06-23-2017, 06:33 AM
Hi
I live in zip 12458 and need the left side valve cover as long as it is not cracked or broken edges anywhere. Steve

HwyStar
06-23-2017, 02:50 PM
Sorry, sent that off. I'll see if I have another when I get home.
Dave


Hi
I live in zip 12458 and need the left side valve cover as long as it is not cracked or broken edges anywhere. Steve

stevenx40
06-24-2017, 06:05 PM
I found a valve cover , how about the water inlet housing ?

HwyStar
06-24-2017, 10:19 PM
I still have it. Pm me your address and I will send it to you.
Dave

HwyStar
07-03-2017, 04:53 PM
Got it boxed and shipping was $18. Sorry for delay!
Dave


I found a valve cover , how about the water inlet housing ?

HwyStar
07-03-2017, 04:54 PM
Got the SC boxed. Came out to 28#.
Dave


[QUOTE=HwyStar;1109773]Take a close look at the three pictures here. If there is anything you want, let me know. Just pay shipping. I'm in VA 23061. The FelPro box are new TTY bolts. The Napa box is new rear pads. And, there are 4 new in box Bosch Platinum +2s. Everything here is early SC. I also have a good 99 up 7.3 PSD radiator, and a 6.0 PSD radiator with a small leak that can be easily fixed. If no one gets this stuff, I making a metal run to the recyclers with it. I'm going out to sea for two weeks as of Monday. So, I might be hard to get.

http://i48.photobucket.com/albums/f224/Windstarpro/IMAG0041_zpsatzb5687.jpg (http://s48.photobucket.com/user/Windstarpro/media/IMAG0041_zpsatzb5687.jpg.html)

Sent you a PM about the M90 (if it's up for grabs).
-g

Joshb530
07-03-2017, 05:48 PM
Sc and intercooler pipping? To 96002 California

HwyStar
07-03-2017, 08:18 PM
I just sent the SC off. I do have a upper and lower intercooler pipe set if you would like that.
Dave


Sc and intercooler pipping? To 96002 California

Dbarnhill
07-04-2017, 04:25 AM
Radiator fan to 44718?

JeffTBird93
07-04-2017, 09:30 AM
One of the jackshaft brackets, to 25430? Got a project in mind.