PDA

View Full Version : Blow by on my 90 SC



Ballman
05-27-2017, 10:36 PM
OK, so I replaced the Cam sensor , crank shaft sensor and the Module , all because when it first starts , then goes to idle and warms up I can see the check engine light trys to come on , kind of low light , I turn it off and then it will not start back up . If it cools down .... then it will start back up . ........next is up on top where you add oil at,, I'm getting a lot of blow by coming out , I say a lot and it is .... I'm hoping this is not my rings going bad .. any help or idea . Thanks. D.Wilder Ballman32@aol.com


If your in Indiana , come on over and see it happen in real time .