PDA

View Full Version : parting out soon



elanoresc
07-21-2017, 01:14 PM
I will be parting put my sc due to the amount of rust that took it over very bad. With that being said I will be starting to part it out end of August just want to make sure the parts will even sell. I will start with list populate prices later. Most parts are newish condition only ran under 500 miles. parts will be ready to ship by 8-1-2017[B]Buyer pays actual full shipping[/
85mm t/b-$225



mid length headers-$325
down tubes-1.
resonator dynomax-2.
mandrel bends dual exhaust pipe package-3.
Pair of dynomax mufflers sounds deep and crisp with whole exhaust set up.-4. whole exhaust already welded into a 2 piece items 1-4 $450
Great auto trans has Mark8 internals gearing and such with a mild shift kit very strong dependable trans that will bark through all 3 gears and ride smooth as glass in overdrive. A must for a fast cruiser!!!!!!!-$500 good deal very strong trans.
under drive pulley set crank aluminum water steel none for alternator-$100

s/c pulley 5%-$50

not a fast part but good ones rack plus steering pump
lowering springs vogts 3/4
also any part off motor body and clean seats blue cloth with some leather

bt04250
07-21-2017, 01:26 PM
Interested in tensioner with mp springs, 10% jackshaft pully, and possibly the mpx.

spunky
07-21-2017, 10:03 PM
I'll take mid length headers how much $ email jacks13@live.com

Broncojohnny
07-23-2017, 12:19 PM
Interested in the jack shaft pulley

elanoresc
07-24-2017, 11:58 AM
Sorry fellas don't get on much anymore car is still 100% together so it will be some time yet. I will let people know.

meismyname
07-25-2017, 12:25 AM
I might be interested in these parts, depending on price. Since I'm getting my suspension parts installed first, I'm not in a huge hurry, so whenever you're ready, just let me know.

85mm t/b
3.5in pipe with filter
85mm mass housing with purple sample( for 60lb injectors )
siemens 60lb injectors

sc-r
07-29-2017, 06:14 AM
I'm interested in the mpx.

bt04250
07-29-2017, 10:26 AM
I'll take the 2 mp tensioners and the 10% jack shaft pully will send pm also

Csirny
07-30-2017, 07:22 AM
I sent a pm about the QH

ERamos
07-30-2017, 08:11 AM
I'd be interested in the exhaust setup, lmk when you start to disassemble the car.

Matt6753
07-30-2017, 11:36 PM
I'd be interested in the sc pulley and exhaust. Possible other parts if you want to message me once it's apart.

Kalando82
07-31-2017, 01:26 AM
I'm interested in the a.c. delete for 20 bucks. My email is kalando82@gmail.com

elanoresc
07-31-2017, 07:51 AM
I will be responding to people in proper order of thread and p.m. responses. I will be responding via email or private message. Thank you

elanoresc
07-31-2017, 10:09 AM
All threads replied to via private message or email.

MaddMartigan93
07-31-2017, 10:54 AM
Is the car an automatic or manual? If it's a manual, are you selling those parts too?

elanoresc
07-31-2017, 10:56 AM
it is an auto but it is built pretty tough and will bang gears as hard as a manual.

Thunder_chicken
08-01-2017, 09:57 PM
Interested in the headers. Can you PM me pictures of condition and shipping quote to 98373?

pock1
08-02-2017, 02:53 AM
How are the struts/ shocks? Factory or aftermarket, condition? Do the lowering springs come with? The tony.

elanoresc
08-02-2017, 07:47 AM
Shocks and struts are nothing worth talking about some Monroe non adjustable, but they were new few hundred miles and a lot of sitting.

elanoresc
08-07-2017, 11:47 AM
Replied to everyone on this thread about parts if you don't look at your private messages you might have 1 from me. If not I will continue down the line of people waiting on answers for the same parts.

rjgraul
08-07-2017, 02:57 PM
Deleted......