PDA

View Full Version : Did you lose the heat/blower motor?



CougarXR/7
08-31-2017, 03:54 PM
Ok....if you find yourself suddenly faced with no heat/blower operation........checking the usual higher amp fuses is a must...........still nothing? Ok.........in Ford's infinite wisdom..they tired about 11 circuits to one fuse. Check the 5 Amp fuse in your fuse panel. If it's blown.that maybe the source of all your problems. Ask me cuz' I know..........my 94' SC did that to me.

RalphP
08-31-2017, 06:22 PM
No, I knew exactly where it was. It did blow the fuse and quit, though *grins*

RwP

CougarXR/7
08-31-2017, 07:20 PM
All the damn wires, fuses......and Ford used a 5 amp fuse..........and call it RUN on the panel.......who decided on that?....LOL.............works fine now.

RalphP
08-31-2017, 09:31 PM
All the damn wires, fuses......and Ford used a 5 amp fuse..........and call it RUN on the panel.......who decided on that?....LOL.............works fine now.

Well, it's only running the EATC, and it's only when you're in RUN, so ...

(It's the "We're on and running" and is more a control voltage than a real voltage; that way, there's less current on that one wire.)

RwP