PDA

View Full Version : Dash brake light on



Quik95SC
04-18-2018, 10:26 AM
I just changed my brakes on my 95SC and put used cobra calipers and rotors on from my other 95SC. Bled the just fine, but now my brake light on the dash comes on as soon as I start it.

Any ideas what might cause this? It was never on before, so I am confused.

David Neibert
04-18-2018, 10:36 AM
I just changed my brakes on my 95SC and put used cobra calipers and rotors on from my other 95SC. Bled the just fine, but now my brake light on the dash comes on as soon as I start it.

Any ideas what might cause this? It was never on before, so I am confused.

Low on brake fluid ?

fstcoup
04-18-2018, 03:01 PM
A kinked or not connected ABS lead will cause this as well as your e brake not being fully released .

Quik95SC
04-18-2018, 04:45 PM
Low on brake fluid ?

No sir it is full and never really went very low. I checked it constantly while bleeding.

Quik95SC
04-18-2018, 04:46 PM
A kinked or not connected ABS lead will cause this as well as your e brake not being fully released .

I will check to make sure nothing got broken with the ASB sensors on any of the wheels.

Thanks!

XB-70
04-19-2018, 09:40 AM
I will check to make sure nothing got broken with the ASB sensors on any of the wheels.

Thanks!


If you have a code reader, you can read the codes from the ABS plug next to the engine compartment fuze box, it will tell you which wheel sensor is not providing input or other malfunction. See you at Campbell North Skills shop this afternoon 4/19? I will be there 3 to 8 PM.

Quik95SC
04-20-2018, 04:15 PM
Thanks for the ideas folks, turned out to be a stuck float as was suggested on FB! Easy fix!

Smitty