PDA

View Full Version : Best way to get SC pulley off?



layinthesmack31
11-26-2002, 02:08 PM
I have been wanting to put on my 5% overdrive pulley for some time now and i have been reading the threads about how to get the stock pulley off and i was wondering what u guys have found to be the best way to remove it without bending it all up? can u tell me what i need to do it and the steps i will need to follow to safely get it off and then get the new pulley on? well thanks
Matt

blksc
11-26-2002, 02:39 PM
we did mine with a 3 leg puller, and plenty of wd-40. when you are pulling the pulley, go slow, and easy so you dont apply too much force to the pulley.

plev72
11-27-2002, 12:56 AM
I used a $30 3-tooth puller as well, it came off very easily. You just have to fit the 3 tooth puller around your upper radiator hose.

DLF
11-28-2002, 02:30 AM
Put some small pieces of plywood between the puller jaws and the rear of the pulley to protect it and distribute the load, they'll deform if you don't.