Tim Groth
SCCoA Member
Need some suggestions from those who have already pioneered the MP FMIC, I need to know the best options for cooling and keeping IATs as low as possible. Please keep in mind I intend to keep the A/C on the car - this was added back at my wife's request so removal is not negotiable.
Car currently has a brand new Factory Condenser, MP FMIC and then a 20x21x3 inch Cold Case radiator I purchased while on the power tour. As a puller I am running a SPAL 16 fan, with the highest CFM rating they offer. The factory A/C pusher fan is in place, however it isn't triggering w/ AC or high temps currently...I'm in the process of sorting that one out. Short term I plan to snag a pigtail from a parts car and wire in a switch to trigger the fan as needed. I've yet to run A/C till I manage my temps.
I believe I can make this setup work with a quality pusher fan setup, just need to know what every else is running.
-Tim
Car currently has a brand new Factory Condenser, MP FMIC and then a 20x21x3 inch Cold Case radiator I purchased while on the power tour. As a puller I am running a SPAL 16 fan, with the highest CFM rating they offer. The factory A/C pusher fan is in place, however it isn't triggering w/ AC or high temps currently...I'm in the process of sorting that one out. Short term I plan to snag a pigtail from a parts car and wire in a switch to trigger the fan as needed. I've yet to run A/C till I manage my temps.
I believe I can make this setup work with a quality pusher fan setup, just need to know what every else is running.
-Tim